|
|
|
telepathy-glib Reference Manual | |
|---|---|---|---|---|
| Top | Description | ||||
Text channelsText channels — client-side wrappers for the Text channel type, and the Chat State and Password interfaces |
#include <telepathy-glib/channel.h> gboolean tp_cli_channel_type_text_run_acknowledge_pending_messages (TpChannel *proxy,gint timeout_ms,const GArray *in_IDs,GError **error,GMainLoop **loop); gboolean tp_cli_channel_type_text_run_get_message_types (TpChannel *proxy,gint timeout_ms,GArray **out_Available_Types,GError **error,GMainLoop **loop); gboolean tp_cli_channel_type_text_run_list_pending_messages (TpChannel *proxy,gint timeout_ms,gboolean in_Clear,GPtrArray **out_Pending_Messages,GError **error,GMainLoop **loop); gboolean tp_cli_channel_type_text_run_send (TpChannel *proxy,gint timeout_ms,guint in_Type,const gchar *in_Text,GError **error,GMainLoop **loop); TpProxyPendingCall * tp_cli_channel_type_text_call_acknowledge_pending_messages (TpChannel *proxy,gint timeout_ms,const GArray *in_IDs,tp_cli_channel_type_text_callback_for_acknowledge_pending_messages callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object); TpProxyPendingCall * tp_cli_channel_type_text_call_get_message_types (TpChannel *proxy,gint timeout_ms,tp_cli_channel_type_text_callback_for_get_message_types callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object); TpProxyPendingCall * tp_cli_channel_type_text_call_list_pending_messages (TpChannel *proxy,gint timeout_ms,gboolean in_Clear,tp_cli_channel_type_text_callback_for_list_pending_messages callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object); TpProxyPendingCall * tp_cli_channel_type_text_call_send (TpChannel *proxy,gint timeout_ms,guint in_Type,const gchar *in_Text,tp_cli_channel_type_text_callback_for_send callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object); void (*tp_cli_channel_type_text_callback_for_acknowledge_pending_messages) (TpChannel *proxy,const GError *error,gpointer user_data,GObject *weak_object); void (*tp_cli_channel_type_text_callback_for_get_message_types) (TpChannel *proxy,const GArray *out_Available_Types,const GError *error,gpointer user_data,GObject *weak_object); void (*tp_cli_channel_type_text_callback_for_list_pending_messages) (TpChannel *proxy,const GPtrArray *out_Pending_Messages,const GError *error,gpointer user_data,GObject *weak_object); void (*tp_cli_channel_type_text_callback_for_send) (TpChannel *proxy,const GError *error,gpointer user_data,GObject *weak_object); TpProxySignalConnection * tp_cli_channel_type_text_connect_to_lost_message (TpChannel *proxy,tp_cli_channel_type_text_signal_callback_lost_message callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error); TpProxySignalConnection * tp_cli_channel_type_text_connect_to_received (TpChannel *proxy,tp_cli_channel_type_text_signal_callback_received callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error); TpProxySignalConnection * tp_cli_channel_type_text_connect_to_send_error (TpChannel *proxy,tp_cli_channel_type_text_signal_callback_send_error callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error); TpProxySignalConnection * tp_cli_channel_type_text_connect_to_sent (TpChannel *proxy,tp_cli_channel_type_text_signal_callback_sent callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error); void (*tp_cli_channel_type_text_signal_callback_lost_message) (TpChannel *proxy,gpointer user_data,GObject *weak_object); void (*tp_cli_channel_type_text_signal_callback_received) (TpChannel *proxy,guint arg_ID,guint arg_Timestamp,guint arg_Sender,guint arg_Type,guint arg_Flags,const gchar *arg_Text,gpointer user_data,GObject *weak_object); void (*tp_cli_channel_type_text_signal_callback_send_error) (TpChannel *proxy,guint arg_Error,guint arg_Timestamp,guint arg_Type,const gchar *arg_Text,gpointer user_data,GObject *weak_object); void (*tp_cli_channel_type_text_signal_callback_sent) (TpChannel *proxy,guint arg_Timestamp,guint arg_Type,const gchar *arg_Text,gpointer user_data,GObject *weak_object); void (*tp_cli_channel_interface_messages_callback_for_get_pending_message_content) (TpChannel *proxy,GHashTable *out_Content,const GError *error,gpointer user_data,GObject *weak_object); TpProxyPendingCall * tp_cli_channel_interface_messages_call_get_pending_message_content (TpChannel *proxy,gint timeout_ms,guint in_Message_ID,const GArray *in_Parts,tp_cli_channel_interface_messages_callback_for_get_pending_message_content callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object); gboolean tp_cli_channel_interface_messages_run_get_pending_message_content (TpChannel *proxy,gint timeout_ms,guint in_Message_ID,const GArray *in_Parts,GHashTable **out_Content,GError **error,GMainLoop **loop); void (*tp_cli_channel_interface_messages_callback_for_send_message) (TpChannel *proxy,const gchar *out_Token,const GError *error,gpointer user_data,GObject *weak_object); TpProxyPendingCall * tp_cli_channel_interface_messages_call_send_message (TpChannel *proxy,gint timeout_ms,const GPtrArray *in_Message,guint in_Flags,tp_cli_channel_interface_messages_callback_for_send_message callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object); gboolean tp_cli_channel_interface_messages_run_send_message (TpChannel *proxy,gint timeout_ms,const GPtrArray *in_Message,guint in_Flags,gchar **out_Token,GError **error,GMainLoop **loop); void (*tp_cli_channel_interface_messages_signal_callback_message_received) (TpChannel *proxy,const GPtrArray *arg_Message,gpointer user_data,GObject *weak_object); TpProxySignalConnection * tp_cli_channel_interface_messages_connect_to_message_received (TpChannel *proxy,tp_cli_channel_interface_messages_signal_callback_message_received callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error); void (*tp_cli_channel_interface_messages_signal_callback_message_sent) (TpChannel *proxy,const GPtrArray *arg_Content,guint arg_Flags,const gchar *arg_Message_Token,gpointer user_data,GObject *weak_object); TpProxySignalConnection * tp_cli_channel_interface_messages_connect_to_message_sent (TpChannel *proxy,tp_cli_channel_interface_messages_signal_callback_message_sent callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error); void (*tp_cli_channel_interface_messages_signal_callback_pending_messages_removed) (TpChannel *proxy,const GArray *arg_Message_IDs,gpointer user_data,GObject *weak_object); TpProxySignalConnection * tp_cli_channel_interface_messages_connect_to_pending_messages_removed (TpChannel *proxy,tp_cli_channel_interface_messages_signal_callback_pending_messages_removed callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error); gboolean tp_cli_channel_interface_chat_state_run_set_chat_state (TpChannel *proxy,gint timeout_ms,guint in_State,GError **error,GMainLoop **loop); TpProxyPendingCall * tp_cli_channel_interface_chat_state_call_set_chat_state (TpChannel *proxy,gint timeout_ms,guint in_State,tp_cli_channel_interface_chat_state_callback_for_set_chat_state callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object); void (*tp_cli_channel_interface_chat_state_callback_for_set_chat_state) (TpChannel *proxy,const GError *error,gpointer user_data,GObject *weak_object); TpProxySignalConnection * tp_cli_channel_interface_chat_state_connect_to_chat_state_changed (TpChannel *proxy,tp_cli_channel_interface_chat_state_signal_callback_chat_state_changed callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error); void (*tp_cli_channel_interface_chat_state_signal_callback_chat_state_changed) (TpChannel *proxy,guint arg_Contact,guint arg_State,gpointer user_data,GObject *weak_object); gboolean tp_cli_channel_interface_password_run_get_password_flags (TpChannel *proxy,gint timeout_ms,guint *out_Password_Flags,GError **error,GMainLoop **loop); gboolean tp_cli_channel_interface_password_run_provide_password (TpChannel *proxy,gint timeout_ms,const gchar *in_Password,gboolean *out_Correct,GError **error,GMainLoop **loop); TpProxyPendingCall * tp_cli_channel_interface_password_call_get_password_flags (TpChannel *proxy,gint timeout_ms,tp_cli_channel_interface_password_callback_for_get_password_flags callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object); TpProxyPendingCall * tp_cli_channel_interface_password_call_provide_password (TpChannel *proxy,gint timeout_ms,const gchar *in_Password,tp_cli_channel_interface_password_callback_for_provide_password callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object); void (*tp_cli_channel_interface_password_callback_for_get_password_flags) (TpChannel *proxy,guint out_Password_Flags,const GError *error,gpointer user_data,GObject *weak_object); void (*tp_cli_channel_interface_password_callback_for_provide_password) (TpChannel *proxy,gboolean out_Correct,const GError *error,gpointer user_data,GObject *weak_object); TpProxySignalConnection * tp_cli_channel_interface_password_connect_to_password_flags_changed (TpChannel *proxy,tp_cli_channel_interface_password_signal_callback_password_flags_changed callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error); void (*tp_cli_channel_interface_password_signal_callback_password_flags_changed) (TpChannel *proxy,guint arg_Added,guint arg_Removed,gpointer user_data,GObject *weak_object);
A major use for instant messaging is obviously to send messages. Channels of type Text represent IM conversations or chat rooms.
This section documents the auto-generated C wrappers for the Text channel type, and also for the Chat State and Password interfaces, which are usually used in conjunction with Text channels.
gboolean tp_cli_channel_type_text_run_acknowledge_pending_messages (TpChannel *proxy,gint timeout_ms,const GArray *in_IDs,GError **error,GMainLoop **loop);
Call the method AcknowledgePendingMessages and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
Inform the channel that you have handled messages by displaying them to the user (or equivalent), so they can be removed from the pending queue.
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to pass an 'in' argument: The IDs of the messages to acknowledge |
|
If not NULL, used to return errors if FALSE
is returned
|
|
If not NULL, set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit(), causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
gboolean tp_cli_channel_type_text_run_get_message_types (TpChannel *proxy,gint timeout_ms,GArray **out_Available_Types,GError **error,GMainLoop **loop);
Call the method GetMessageTypes and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
Return an array indicating which types of message may be sent on this channel.
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to return an 'out' argument if TRUE is returned: An array of integer message types (ChannelTextMessageType)
|
|
If not NULL, used to return errors if FALSE
is returned
|
|
If not NULL, set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit(), causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
gboolean tp_cli_channel_type_text_run_list_pending_messages (TpChannel *proxy,gint timeout_ms,gboolean in_Clear,GPtrArray **out_Pending_Messages,GError **error,GMainLoop **loop);
tp_cli_channel_type_text_run_list_pending_messages is deprecated and should not be used in newly-written code. Setting this to true is NOT RECOMMENDED for clients that have some sort of persistent message storage - clients SHOULD only acknowledge messages after they have actually stored them, which is impossible if this flag is true.
Call the method ListPendingMessages and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
List the messages currently in the pending queue, and optionally remove then all.
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to pass an 'in' argument: If true, behave as if <tp:member-ref>AcknowledgePendingMessages</tp:member-ref> had also been called. |
|
Used to return an 'out' argument if TRUE is returned: <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> An array of structs representing the pending queue. Each contains: <ul> <li>a numeric identifier</li> <li>a Unix timestamp indicating when the message was received</li> <li>the contact handle for the contact who sent the message</li> <li>the message type, taken from ChannelTextMessageType</li> <li>the bitwise-OR of the message flags from ChannelTextMessageFlags</li> <li>the text of the message</li> </ul>
|
|
If not NULL, used to return errors if FALSE
is returned
|
|
If not NULL, set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit(), causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
gboolean tp_cli_channel_type_text_run_send (TpChannel *proxy,gint timeout_ms,guint in_Type,const gchar *in_Text,GError **error,GMainLoop **loop);
Call the method Send and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Request that a message be sent on this channel. When the message has been submitted for delivery, this method will return and the <tp:member-ref>Sent</tp:member-ref> signal will be emitted. If the message cannot be submitted for delivery, the method returns an error and no signal is emitted.</p> <p>This method SHOULD return before the Sent signal is emitted.</p> <tp:rationale> <p>When a Text channel implements the <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Interface">Messages</tp:dbus-ref> interface, that "SHOULD" becomes a "MUST".</p> </tp:rationale>
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to pass an 'in' argument: An integer indicating the type of the message |
|
Used to pass an 'in' argument: The message to send |
|
If not NULL, used to return errors if FALSE
is returned
|
|
If not NULL, set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit(), causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
TpProxyPendingCall * tp_cli_channel_type_text_call_acknowledge_pending_messages (TpChannel *proxy,gint timeout_ms,const GArray *in_IDs,tp_cli_channel_type_text_callback_for_acknowledge_pending_messages callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object);
Start a AcknowledgePendingMessages method call.
Inform the channel that you have handled messages by displaying them to the user (or equivalent), so they can be removed from the pending queue.
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
Used to pass an 'in' argument: The IDs of the messages to acknowledge |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL, a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
TpProxyPendingCall * tp_cli_channel_type_text_call_get_message_types (TpChannel *proxy,gint timeout_ms,tp_cli_channel_type_text_callback_for_get_message_types callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object);
Start a GetMessageTypes method call.
Return an array indicating which types of message may be sent on this channel.
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL, a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
TpProxyPendingCall * tp_cli_channel_type_text_call_list_pending_messages (TpChannel *proxy,gint timeout_ms,gboolean in_Clear,tp_cli_channel_type_text_callback_for_list_pending_messages callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object);
tp_cli_channel_type_text_call_list_pending_messages is deprecated and should not be used in newly-written code. Setting this to true is NOT RECOMMENDED for clients that have some sort of persistent message storage - clients SHOULD only acknowledge messages after they have actually stored them, which is impossible if this flag is true.
Start a ListPendingMessages method call.
List the messages currently in the pending queue, and optionally remove then all.
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
Used to pass an 'in' argument: If true, behave as if <tp:member-ref>AcknowledgePendingMessages</tp:member-ref> had also been called. |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL, a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
TpProxyPendingCall * tp_cli_channel_type_text_call_send (TpChannel *proxy,gint timeout_ms,guint in_Type,const gchar *in_Text,tp_cli_channel_type_text_callback_for_send callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object);
Start a Send method call.
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Request that a message be sent on this channel. When the message has been submitted for delivery, this method will return and the <tp:member-ref>Sent</tp:member-ref> signal will be emitted. If the message cannot be submitted for delivery, the method returns an error and no signal is emitted.</p> <p>This method SHOULD return before the Sent signal is emitted.</p> <tp:rationale> <p>When a Text channel implements the <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Interface">Messages</tp:dbus-ref> interface, that "SHOULD" becomes a "MUST".</p> </tp:rationale>
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
Used to pass an 'in' argument: An integer indicating the type of the message |
|
Used to pass an 'in' argument: The message to send |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL, a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
void (*tp_cli_channel_type_text_callback_for_acknowledge_pending_messages) (TpChannel *proxy,const GError *error,gpointer user_data,GObject *weak_object);
Signature of the callback called when a AcknowledgePendingMessages method call succeeds or fails.
|
the proxy on which the call was made |
|
NULL on success, or an error on failure
|
|
user-supplied data |
|
user-supplied object |
void (*tp_cli_channel_type_text_callback_for_get_message_types) (TpChannel *proxy,const GArray *out_Available_Types,const GError *error,gpointer user_data,GObject *weak_object);
Signature of the callback called when a GetMessageTypes method call succeeds or fails.
void (*tp_cli_channel_type_text_callback_for_list_pending_messages) (TpChannel *proxy,const GPtrArray *out_Pending_Messages,const GError *error,gpointer user_data,GObject *weak_object);
tp_cli_channel_type_text_callback_for_list_pending_messages is deprecated and should not be used in newly-written code. Setting this to true is NOT RECOMMENDED for clients that have some sort of persistent message storage - clients SHOULD only acknowledge messages after they have actually stored them, which is impossible if this flag is true.
Signature of the callback called when a ListPendingMessages method call succeeds or fails.
|
the proxy on which the call was made |
|
Used to return an 'out' argument if error is NULL: <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> An array of structs representing the pending queue. Each contains: <ul> <li>a numeric identifier</li> <li>a Unix timestamp indicating when the message was received</li> <li>the contact handle for the contact who sent the message</li> <li>the message type, taken from ChannelTextMessageType</li> <li>the bitwise-OR of the message flags from ChannelTextMessageFlags</li> <li>the text of the message</li> </ul>
|
|
NULL on success, or an error on failure
|
|
user-supplied data |
|
user-supplied object |
void (*tp_cli_channel_type_text_callback_for_send) (TpChannel *proxy,const GError *error,gpointer user_data,GObject *weak_object);
Signature of the callback called when a Send method call succeeds or fails.
|
the proxy on which the call was made |
|
NULL on success, or an error on failure
|
|
user-supplied data |
|
user-supplied object |
TpProxySignalConnection * tp_cli_channel_type_text_connect_to_lost_message (TpChannel *proxy,tp_cli_channel_type_text_signal_callback_lost_message callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error);
Connect a handler to the signal LostMessage.
This signal is emitted to indicate that an incoming message was not able to be stored and forwarded by the connection manager due to lack of memory.
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL, used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
TpProxySignalConnection * tp_cli_channel_type_text_connect_to_received (TpChannel *proxy,tp_cli_channel_type_text_signal_callback_received callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error);
Connect a handler to the signal Received.
Signals that a message with the given id, timestamp, sender, type and text has been received on this channel. Applications that catch this signal and reliably inform the user of the message should acknowledge that they have dealt with the message with the <tp:member-ref>AcknowledgePendingMessages</tp:member-ref> method.
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL, used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
TpProxySignalConnection * tp_cli_channel_type_text_connect_to_send_error (TpChannel *proxy,tp_cli_channel_type_text_signal_callback_send_error callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error);
Connect a handler to the signal SendError.
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Signals that an outgoing message has failed to send. The error will be one of the values from ChannelTextSendError.</p> <p>This signal should only be emitted for messages for which <tp:member-ref>Sent</tp:member-ref> has already been emitted and <tp:member-ref>Send</tp:member-ref> has already returned success.</p>
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL, used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
TpProxySignalConnection * tp_cli_channel_type_text_connect_to_sent (TpChannel *proxy,tp_cli_channel_type_text_signal_callback_sent callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error);
Connect a handler to the signal Sent.
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Signals that a message has been submitted for sending.</p>
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL, used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
void (*tp_cli_channel_type_text_signal_callback_lost_message) (TpChannel *proxy,gpointer user_data,GObject *weak_object);
Represents the signature of a callback for the signal LostMessage.
|
The proxy on which tp_cli_channel_type_text_connect_to_lost_message()
was called
|
|
User-supplied data |
|
User-supplied weakly referenced object |
void (*tp_cli_channel_type_text_signal_callback_received) (TpChannel *proxy,guint arg_ID,guint arg_Timestamp,guint arg_Sender,guint arg_Type,guint arg_Flags,const gchar *arg_Text,gpointer user_data,GObject *weak_object);
Represents the signature of a callback for the signal Received.
|
The proxy on which tp_cli_channel_type_text_connect_to_received()
was called
|
|
A numeric identifier for acknowledging the message |
|
A Unix timestamp indicating when the message was received |
|
The handle of the contact who sent the message |
|
The type of the message (normal, action, notice, etc.) |
|
A bitwise OR of the message flags |
|
The text of the message |
|
User-supplied data |
|
User-supplied weakly referenced object |
void (*tp_cli_channel_type_text_signal_callback_send_error) (TpChannel *proxy,guint arg_Error,guint arg_Timestamp,guint arg_Type,const gchar *arg_Text,gpointer user_data,GObject *weak_object);
Represents the signature of a callback for the signal SendError.
|
The proxy on which tp_cli_channel_type_text_connect_to_send_error()
was called
|
|
The error that occurred |
|
The Unix timestamp indicating when the message was sent |
|
The message type |
|
The text of the message |
|
User-supplied data |
|
User-supplied weakly referenced object |
void (*tp_cli_channel_type_text_signal_callback_sent) (TpChannel *proxy,guint arg_Timestamp,guint arg_Type,const gchar *arg_Text,gpointer user_data,GObject *weak_object);
Represents the signature of a callback for the signal Sent.
|
The proxy on which tp_cli_channel_type_text_connect_to_sent()
was called
|
|
Unix timestamp indicating when the message was sent |
|
The message type (normal, action, notice, etc) from ChannelTextMessageType |
|
The text of the message. If the message was, or will be, altered during transmission, this argument SHOULD reflect what other contacts will receive rather than being a copy of the argument to <tp:member-ref>Send</tp:member-ref>. |
|
User-supplied data |
|
User-supplied weakly referenced object |
void (*tp_cli_channel_interface_messages_callback_for_get_pending_message_content) (TpChannel *proxy,GHashTable *out_Content,const GError *error,gpointer user_data,GObject *weak_object);
Signature of the callback called when a GetPendingMessageContent method call succeeds or fails.
|
the proxy on which the call was made |
|
Used to return an 'out' argument if error is NULL: <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>The content of the requested parts. The keys in this mapping are positions in the array of message parts; the values are either of type 's' or 'ay' (UTF-8 text string, or byte array), following the same rules as for the value of the 'content' key in the <tp:type>Message_Part</tp:type> mappings.</p> <p>If the one of the requested part numbers was greater than zero but referred to a part that had no content (i.e. it had no 'content-type' key or no 'content' key), it is simply omitted from this mapping; this is not considered to be an error condition.</p>
|
|
NULL on success, or an error on failure
|
|
user-supplied data |
|
user-supplied object |
TpProxyPendingCall * tp_cli_channel_interface_messages_call_get_pending_message_content (TpChannel *proxy,gint timeout_ms,guint in_Message_ID,const GArray *in_Parts,tp_cli_channel_interface_messages_callback_for_get_pending_message_content callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object);
Start a GetPendingMessageContent method call.
Retrieve the content of one or more parts of a pending message. Note that this function may take a considerable amount of time to return if the part's 'needs-retrieval' flag is true; consider extending the default D-Bus method call timeout. Additional API is likely to be added in future, to stream large message parts.
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
Used to pass an 'in' argument: The ID of a pending message |
|
Used to pass an 'in' argument: The desired entries in the array of message parts, identified by their position. The "headers" part (which is not a valid argument to this method) is considered to be part 0, so the valid part numbers start at 1 (for the second Message_Part). |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL, a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
gboolean tp_cli_channel_interface_messages_run_get_pending_message_content (TpChannel *proxy,gint timeout_ms,guint in_Message_ID,const GArray *in_Parts,GHashTable **out_Content,GError **error,GMainLoop **loop);
Call the method GetPendingMessageContent and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
Retrieve the content of one or more parts of a pending message. Note that this function may take a considerable amount of time to return if the part's 'needs-retrieval' flag is true; consider extending the default D-Bus method call timeout. Additional API is likely to be added in future, to stream large message parts.
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to pass an 'in' argument: The ID of a pending message |
|
Used to pass an 'in' argument: The desired entries in the array of message parts, identified by their position. The "headers" part (which is not a valid argument to this method) is considered to be part 0, so the valid part numbers start at 1 (for the second Message_Part). |
|
Used to return an 'out' argument if TRUE is returned: <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>The content of the requested parts. The keys in this mapping are positions in the array of message parts; the values are either of type 's' or 'ay' (UTF-8 text string, or byte array), following the same rules as for the value of the 'content' key in the <tp:type>Message_Part</tp:type> mappings.</p> <p>If the one of the requested part numbers was greater than zero but referred to a part that had no content (i.e. it had no 'content-type' key or no 'content' key), it is simply omitted from this mapping; this is not considered to be an error condition.</p>
|
|
If not NULL, used to return errors if FALSE
is returned
|
|
If not NULL, set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit(), causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
void (*tp_cli_channel_interface_messages_callback_for_send_message) (TpChannel *proxy,const gchar *out_Token,const GError *error,gpointer user_data,GObject *weak_object);
Signature of the callback called when a SendMessage method call succeeds or fails.
|
the proxy on which the call was made |
|
Used to return an 'out' argument if error is NULL: An opaque token used to match any incoming delivery or failure reports against this message, or an empty string if the message is not readily identifiable.
|
|
NULL on success, or an error on failure
|
|
user-supplied data |
|
user-supplied object |
TpProxyPendingCall * tp_cli_channel_interface_messages_call_send_message (TpChannel *proxy,gint timeout_ms,const GPtrArray *in_Message,guint in_Flags,tp_cli_channel_interface_messages_callback_for_send_message callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object);
Start a SendMessage method call.
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Submit a message to the server for sending. If this method returns successfully, the message has been submitted to the server and the <tp:member-ref>MessageSent</tp:member-ref> signal is emitted. A corresponding <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Type.Text">Sent</tp:dbus-ref> signal on the Text interface MUST also be emitted.</p> <p>This method MUST return before the MessageSent signal is emitted.</p> <tp:rationale> <p>This means that the process sending the message is the first to see the <tp:type>Sent_Message_Token</tp:type>, and can relate the message to the corresponding <tp:member-ref>MessageSent</tp:member-ref> signal by comparing message tokens (if supported by the protocol).</p> </tp:rationale> <p>If this method fails, message submission to the server has failed and no signal on this interface (or the Text interface) is emitted.</p>
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
Used to pass an 'in' argument: The message content, including any attachments or alternatives |
|
Used to pass an 'in' argument: Flags affecting how the message is sent. |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL, a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
gboolean tp_cli_channel_interface_messages_run_send_message (TpChannel *proxy,gint timeout_ms,const GPtrArray *in_Message,guint in_Flags,gchar **out_Token,GError **error,GMainLoop **loop);
Call the method SendMessage and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Submit a message to the server for sending. If this method returns successfully, the message has been submitted to the server and the <tp:member-ref>MessageSent</tp:member-ref> signal is emitted. A corresponding <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Type.Text">Sent</tp:dbus-ref> signal on the Text interface MUST also be emitted.</p> <p>This method MUST return before the MessageSent signal is emitted.</p> <tp:rationale> <p>This means that the process sending the message is the first to see the <tp:type>Sent_Message_Token</tp:type>, and can relate the message to the corresponding <tp:member-ref>MessageSent</tp:member-ref> signal by comparing message tokens (if supported by the protocol).</p> </tp:rationale> <p>If this method fails, message submission to the server has failed and no signal on this interface (or the Text interface) is emitted.</p>
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to pass an 'in' argument: The message content, including any attachments or alternatives |
|
Used to pass an 'in' argument: Flags affecting how the message is sent. |
|
Used to return an 'out' argument if TRUE is returned: An opaque token used to match any incoming delivery or failure reports against this message, or an empty string if the message is not readily identifiable.
|
|
If not NULL, used to return errors if FALSE
is returned
|
|
If not NULL, set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit(), causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
void (*tp_cli_channel_interface_messages_signal_callback_message_received) (TpChannel *proxy,const GPtrArray *arg_Message,gpointer user_data,GObject *weak_object);
Represents the signature of a callback for the signal MessageReceived.
|
The proxy on which tp_cli_channel_interface_messages_connect_to_message_received()
was called
|
|
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> The message content, including any attachments or alternatives |
|
User-supplied data |
|
User-supplied weakly referenced object |
TpProxySignalConnection * tp_cli_channel_interface_messages_connect_to_message_received (TpChannel *proxy,tp_cli_channel_interface_messages_signal_callback_message_received callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error);
Connect a handler to the signal MessageReceived.
Signals that a message has been received and added to the pending messages queue. This MUST be emitted exactly once per emission of the <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Type.Text">Received</tp:dbus-ref> signal on the Text interface. <tp:rationale> The double signal-emission provides compatibility with older clients. Clients supporting Messages should listen for Messages.MessageReceived only (if the channel has the Messages interface) or Text.Received only (otherwise). </tp:rationale>
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL, used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
void (*tp_cli_channel_interface_messages_signal_callback_message_sent) (TpChannel *proxy,const GPtrArray *arg_Content,guint arg_Flags,const gchar *arg_Message_Token,gpointer user_data,GObject *weak_object);
Represents the signature of a callback for the signal MessageSent.
|
The proxy on which tp_cli_channel_interface_messages_connect_to_message_sent()
was called
|
|
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>The message content (see <tp:type>Message_Part</tp:type> for full details). If the message that was passed to SendMessage has a formatted text part that the connection manager recognises, but no text/plain alternative, the CM MUST use the formatted text part to generate a text/plain alternative which is also included in this signal argument.</p> <p>If the connection manager can predict that the message will be altered during transmission, this argument SHOULD reflect what other contacts will receive, rather than being a copy of the argument to SendMessage (if the message is truncated, formatting or alternatives are dropped, etc., then the edited version SHOULD appear in this signal).</p> |
|
<p>Flags affecting how the message was sent. The flags might be a subset of those passed to SendMessage if the caller requested unsupported flags.</p> |
|
An opaque token used to match any incoming delivery or failure reports against this message, or an empty string if the message is not readily identifiable. |
|
User-supplied data |
|
User-supplied weakly referenced object |
TpProxySignalConnection * tp_cli_channel_interface_messages_connect_to_message_sent (TpChannel *proxy,tp_cli_channel_interface_messages_signal_callback_message_sent callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error);
Connect a handler to the signal MessageSent.
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Signals that a message has been submitted for sending. This MUST be emitted exactly once per emission of the <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Type.Text">Sent</tp:dbus-ref> signal on the Text interface.</p> <tp:rationale> <p>This signal allows a process that is not the caller of SendMessage to log sent messages. The double signal-emission provides compatibility with older clients. Clients supporting Messages should listen for Messages.MessageSent only (if the channel has the Messages interface) or Text.Sent only (otherwise).</p> </tp:rationale>
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL, used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
void (*tp_cli_channel_interface_messages_signal_callback_pending_messages_removed) (TpChannel *proxy,const GArray *arg_Message_IDs,gpointer user_data,GObject *weak_object);
Represents the signature of a callback for the signal PendingMessagesRemoved.
|
The proxy on which tp_cli_channel_interface_messages_connect_to_pending_messages_removed()
was called
|
|
The messages that have been removed from the pending message list. |
|
User-supplied data |
|
User-supplied weakly referenced object |
TpProxySignalConnection * tp_cli_channel_interface_messages_connect_to_pending_messages_removed (TpChannel *proxy,tp_cli_channel_interface_messages_signal_callback_pending_messages_removed callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error);
Connect a handler to the signal PendingMessagesRemoved.
The messages with the given IDs have been removed from the <tp:member-ref>PendingMessages</tp:member-ref> list. Clients SHOULD NOT attempt to acknowledge those messages. <tp:rationale> This completes change notification for the PendingMessages property (previously, there was change notification when pending messages were added, but not when they were removed). </tp:rationale>
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL, used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
gboolean tp_cli_channel_interface_chat_state_run_set_chat_state (TpChannel *proxy,gint timeout_ms,guint in_State,GError **error,GMainLoop **loop);
Call the method SetChatState and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
Set the local state and notify other members of the channel that it has changed.
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to pass an 'in' argument: The new state. |
|
If not NULL, used to return errors if FALSE
is returned
|
|
If not NULL, set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit(), causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
TpProxyPendingCall * tp_cli_channel_interface_chat_state_call_set_chat_state (TpChannel *proxy,gint timeout_ms,guint in_State,tp_cli_channel_interface_chat_state_callback_for_set_chat_state callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object);
Start a SetChatState method call.
Set the local state and notify other members of the channel that it has changed.
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
Used to pass an 'in' argument: The new state. |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL, a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
void (*tp_cli_channel_interface_chat_state_callback_for_set_chat_state) (TpChannel *proxy,const GError *error,gpointer user_data,GObject *weak_object);
Signature of the callback called when a SetChatState method call succeeds or fails.
|
the proxy on which the call was made |
|
NULL on success, or an error on failure
|
|
user-supplied data |
|
user-supplied object |
TpProxySignalConnection * tp_cli_channel_interface_chat_state_connect_to_chat_state_changed (TpChannel *proxy,tp_cli_channel_interface_chat_state_signal_callback_chat_state_changed callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error);
Connect a handler to the signal ChatStateChanged.
Emitted when the state of a member of the channel has changed. This includes local state.
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL, used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
void (*tp_cli_channel_interface_chat_state_signal_callback_chat_state_changed) (TpChannel *proxy,guint arg_Contact,guint arg_State,gpointer user_data,GObject *weak_object);
Represents the signature of a callback for the signal ChatStateChanged.
|
The proxy on which tp_cli_channel_interface_chat_state_connect_to_chat_state_changed()
was called
|
|
An integer handle for the contact. |
|
The new state of this contact. |
|
User-supplied data |
|
User-supplied weakly referenced object |
gboolean tp_cli_channel_interface_password_run_get_password_flags (TpChannel *proxy,gint timeout_ms,guint *out_Password_Flags,GError **error,GMainLoop **loop);
Call the method GetPasswordFlags and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
Returns the bitwise-OR of the flags relevant to the password on this channel. The user interface can use this to present information about which operations are currently valid.
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to return an 'out' argument if TRUE is returned: An integer with the logical OR of all the flags set (values of ChannelPasswordFlags)
|
|
If not NULL, used to return errors if FALSE
is returned
|
|
If not NULL, set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit(), causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
gboolean tp_cli_channel_interface_password_run_provide_password (TpChannel *proxy,gint timeout_ms,const gchar *in_Password,gboolean *out_Correct,GError **error,GMainLoop **loop);
Call the method ProvidePassword and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
Provide the password so that the channel can be joined. Must be called with the correct password in order for channel joining to proceed if the 'provide' password flag is set.
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to pass an 'in' argument: The password |
|
Used to return an 'out' argument if TRUE is returned: (Undocumented)
|
|
If not NULL, used to return errors if FALSE
is returned
|
|
If not NULL, set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit(), causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
TpProxyPendingCall * tp_cli_channel_interface_password_call_get_password_flags (TpChannel *proxy,gint timeout_ms,tp_cli_channel_interface_password_callback_for_get_password_flags callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object);
Start a GetPasswordFlags method call.
Returns the bitwise-OR of the flags relevant to the password on this channel. The user interface can use this to present information about which operations are currently valid.
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL, a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
TpProxyPendingCall * tp_cli_channel_interface_password_call_provide_password (TpChannel *proxy,gint timeout_ms,const gchar *in_Password,tp_cli_channel_interface_password_callback_for_provide_password callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object);
Start a ProvidePassword method call.
Provide the password so that the channel can be joined. Must be called with the correct password in order for channel joining to proceed if the 'provide' password flag is set.
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
Used to pass an 'in' argument: The password |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL, a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
void (*tp_cli_channel_interface_password_callback_for_get_password_flags) (TpChannel *proxy,guint out_Password_Flags,const GError *error,gpointer user_data,GObject *weak_object);
Signature of the callback called when a GetPasswordFlags method call succeeds or fails.
|
the proxy on which the call was made |
|
Used to return an 'out' argument if error is NULL: An integer with the logical OR of all the flags set (values of ChannelPasswordFlags)
|
|
NULL on success, or an error on failure
|
|
user-supplied data |
|
user-supplied object |
void (*tp_cli_channel_interface_password_callback_for_provide_password) (TpChannel *proxy,gboolean out_Correct,const GError *error,gpointer user_data,GObject *weak_object);
Signature of the callback called when a ProvidePassword method call succeeds or fails.
TpProxySignalConnection * tp_cli_channel_interface_password_connect_to_password_flags_changed (TpChannel *proxy,tp_cli_channel_interface_password_signal_callback_password_flags_changed callback,gpointer user_data,GDestroyNotify destroy,GObject *weak_object,GError **error);
Connect a handler to the signal PasswordFlagsChanged.
Emitted when the flags as returned by <tp:member-ref>GetPasswordFlags</tp:member-ref> are changed. The user interface should be updated as appropriate.
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL, used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
void (*tp_cli_channel_interface_password_signal_callback_password_flags_changed) (TpChannel *proxy,guint arg_Added,guint arg_Removed,gpointer user_data,GObject *weak_object);
Represents the signature of a callback for the signal PasswordFlagsChanged.
|
The proxy on which tp_cli_channel_interface_password_connect_to_password_flags_changed()
was called
|
|
A bitwise OR of the flags which have been set |
|
A bitwise OR of the flags which have been cleared |
|
User-supplied data |
|
User-supplied weakly referenced object |