telepathy-glib Reference Manual | ||||
---|---|---|---|---|
Top | Description |
Tube channelsTube channels — client-side wrappers for the Tube channel interface, StreamTube channel type and DBusTube channel type. |
#include <telepathy-glib/channel.h> TpProxySignalConnection * tp_cli_channel_interface_tube_connect_to_tube_channel_state_changed (TpChannel *proxy
,tp_cli_channel_interface_tube_signal_callback_tube_channel_state_changed callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
,GError **error
); void (*tp_cli_channel_interface_tube_signal_callback_tube_channel_state_changed) (TpChannel *proxy
,guint arg_State
,gpointer user_data
,GObject *weak_object
); gboolean tp_cli_channel_type_stream_tube_run_offer (TpChannel *proxy
,gint timeout_ms
,guint in_address_type
,const GValue *in_address
,guint in_access_control
,GHashTable *in_parameters
,GError **error
,GMainLoop **loop
); gboolean tp_cli_channel_type_stream_tube_run_accept (TpChannel *proxy
,gint timeout_ms
,guint in_address_type
,guint in_access_control
,const GValue *in_access_control_param
,GValue **out_address
,GError **error
,GMainLoop **loop
); TpProxyPendingCall * tp_cli_channel_type_stream_tube_call_offer (TpChannel *proxy
,gint timeout_ms
,guint in_address_type
,const GValue *in_address
,guint in_access_control
,GHashTable *in_parameters
,tp_cli_channel_type_stream_tube_callback_for_offer callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
); TpProxyPendingCall * tp_cli_channel_type_stream_tube_call_accept (TpChannel *proxy
,gint timeout_ms
,guint in_address_type
,guint in_access_control
,const GValue *in_access_control_param
,tp_cli_channel_type_stream_tube_callback_for_accept callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
); void (*tp_cli_channel_type_stream_tube_callback_for_offer) (TpChannel *proxy
,const GError *error
,gpointer user_data
,GObject *weak_object
); void (*tp_cli_channel_type_stream_tube_callback_for_accept) (TpChannel *proxy
,const GValue *out_address
,const GError *error
,gpointer user_data
,GObject *weak_object
); TpProxySignalConnection * tp_cli_channel_type_stream_tube_connect_to_new_remote_connection (TpChannel *proxy
,tp_cli_channel_type_stream_tube_signal_callback_new_remote_connection callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
,GError **error
); TpProxySignalConnection * tp_cli_channel_type_stream_tube_connect_to_new_local_connection (TpChannel *proxy
,tp_cli_channel_type_stream_tube_signal_callback_new_local_connection callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
,GError **error
); TpProxySignalConnection * tp_cli_channel_type_stream_tube_connect_to_connection_closed (TpChannel *proxy
,tp_cli_channel_type_stream_tube_signal_callback_connection_closed callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
,GError **error
); void (*tp_cli_channel_type_stream_tube_signal_callback_new_remote_connection) (TpChannel *proxy
,guint arg_Handle
,const GValue *arg_Connection_Param
,guint arg_Connection_ID
,gpointer user_data
,GObject *weak_object
); void (*tp_cli_channel_type_stream_tube_signal_callback_new_local_connection) (TpChannel *proxy
,guint arg_Connection_ID
,gpointer user_data
,GObject *weak_object
); void (*tp_cli_channel_type_stream_tube_signal_callback_connection_closed) (TpChannel *proxy
,guint arg_Connection_ID
,const gchar *arg_Error
,const gchar *arg_Message
,gpointer user_data
,GObject *weak_object
); gboolean tp_cli_channel_type_dbus_tube_run_offer (TpChannel *proxy
,gint timeout_ms
,GHashTable *in_parameters
,guint in_access_control
,gchar **out_address
,GError **error
,GMainLoop **loop
); gboolean tp_cli_channel_type_dbus_tube_run_accept (TpChannel *proxy
,gint timeout_ms
,guint in_access_control
,gchar **out_address
,GError **error
,GMainLoop **loop
); TpProxyPendingCall * tp_cli_channel_type_dbus_tube_call_offer (TpChannel *proxy
,gint timeout_ms
,GHashTable *in_parameters
,guint in_access_control
,tp_cli_channel_type_dbus_tube_callback_for_offer callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
); TpProxyPendingCall * tp_cli_channel_type_dbus_tube_call_accept (TpChannel *proxy
,gint timeout_ms
,guint in_access_control
,tp_cli_channel_type_dbus_tube_callback_for_accept callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
); void (*tp_cli_channel_type_dbus_tube_callback_for_offer) (TpChannel *proxy
,const gchar *out_address
,const GError *error
,gpointer user_data
,GObject *weak_object
); void (*tp_cli_channel_type_dbus_tube_callback_for_accept) (TpChannel *proxy
,const gchar *out_address
,const GError *error
,gpointer user_data
,GObject *weak_object
); TpProxySignalConnection * tp_cli_channel_type_dbus_tube_connect_to_dbus_names_changed (TpChannel *proxy
,tp_cli_channel_type_dbus_tube_signal_callback_dbus_names_changed callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
,GError **error
); void (*tp_cli_channel_type_dbus_tube_signal_callback_dbus_names_changed) (TpChannel *proxy
,GHashTable *arg_Added
,const GArray *arg_Removed
,gpointer user_data
,GObject *weak_object
);
A "tube" is a mechanism for arbitrary data transfer. This section documents the auto-generated C wrappers for the Tube channel interface, StreamTube channel type and DBusTube channel type.
TpProxySignalConnection * tp_cli_channel_interface_tube_connect_to_tube_channel_state_changed (TpChannel *proxy
,tp_cli_channel_interface_tube_signal_callback_tube_channel_state_changed callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
,GError **error
);
Connect a handler to the signal TubeChannelStateChanged.
Emitted when the state of the tube channel changes. Valid state transitions are documented with <tp:type>Tube_Channel_State</tp:type>.
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL , used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
void (*tp_cli_channel_interface_tube_signal_callback_tube_channel_state_changed) (TpChannel *proxy
,guint arg_State
,gpointer user_data
,GObject *weak_object
);
Represents the signature of a callback for the signal TubeChannelStateChanged.
|
The proxy on which tp_cli_channel_interface_tube_connect_to_tube_channel_state_changed()
was called
|
|
The new state of the tube. |
|
User-supplied data |
|
User-supplied weakly referenced object |
gboolean tp_cli_channel_type_stream_tube_run_offer (TpChannel *proxy
,gint timeout_ms
,guint in_address_type
,const GValue *in_address
,guint in_access_control
,GHashTable *in_parameters
,GError **error
,GMainLoop **loop
);
Call the method Offer and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
Offer a stream tube exporting the local socket specified.
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to pass an 'in' argument: The type of the listening address of the local service, as a member of Socket_Address_Type. |
|
Used to pass an 'in' argument: The listening address of the local service, as indicated by the address_type. |
|
Used to pass an 'in' argument: The access control the local service applies to the local socket, specified so the connection manager can behave appropriately when it connects. |
|
Used to pass an 'in' argument: The dictionary of arbitrary <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Interface.Tube">Parameters</tp:dbus-ref> to send with the tube offer. |
|
If not NULL , used to return errors if FALSE
is returned
|
|
If not NULL , set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit() , causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
gboolean tp_cli_channel_type_stream_tube_run_accept (TpChannel *proxy
,gint timeout_ms
,guint in_address_type
,guint in_access_control
,const GValue *in_access_control_param
,GValue **out_address
,GError **error
,GMainLoop **loop
);
Call the method Accept and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
Accept a stream tube that's in the "local pending" state. The connection manager will attempt to open the tube. The tube remains in the "local pending" state until the <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Interface.Tube">TubeChannelStateChanged</tp:dbus-ref> signal is emitted.
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to pass an 'in' argument: The type of address the connection manager should listen on. |
|
Used to pass an 'in' argument: <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>The type of access control the connection manager should apply to the socket.</p> <p>Note that if you plan to establish more than one connection through the tube, the Socket_Access_Control_Port access control can't be used as you can't connect more than once from the same port.</p> |
|
Used to pass an 'in' argument: A parameter for the access control type, to be interpreted as specified in the documentation for the Socket_Access_Control enum. |
|
Used to return an 'out' argument if TRUE is returned: The address on which the connection manager will listen for connections to this tube. The client should not attempt to connect to the address until the tube is open.
|
|
If not NULL , used to return errors if FALSE
is returned
|
|
If not NULL , set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit() , causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
TpProxyPendingCall * tp_cli_channel_type_stream_tube_call_offer (TpChannel *proxy
,gint timeout_ms
,guint in_address_type
,const GValue *in_address
,guint in_access_control
,GHashTable *in_parameters
,tp_cli_channel_type_stream_tube_callback_for_offer callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
);
Start a Offer method call.
Offer a stream tube exporting the local socket specified.
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
Used to pass an 'in' argument: The type of the listening address of the local service, as a member of Socket_Address_Type. |
|
Used to pass an 'in' argument: The listening address of the local service, as indicated by the address_type. |
|
Used to pass an 'in' argument: The access control the local service applies to the local socket, specified so the connection manager can behave appropriately when it connects. |
|
Used to pass an 'in' argument: The dictionary of arbitrary <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Interface.Tube">Parameters</tp:dbus-ref> to send with the tube offer. |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL , a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
TpProxyPendingCall * tp_cli_channel_type_stream_tube_call_accept (TpChannel *proxy
,gint timeout_ms
,guint in_address_type
,guint in_access_control
,const GValue *in_access_control_param
,tp_cli_channel_type_stream_tube_callback_for_accept callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
);
Start a Accept method call.
Accept a stream tube that's in the "local pending" state. The connection manager will attempt to open the tube. The tube remains in the "local pending" state until the <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Interface.Tube">TubeChannelStateChanged</tp:dbus-ref> signal is emitted.
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
Used to pass an 'in' argument: The type of address the connection manager should listen on. |
|
Used to pass an 'in' argument: <tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>The type of access control the connection manager should apply to the socket.</p> <p>Note that if you plan to establish more than one connection through the tube, the Socket_Access_Control_Port access control can't be used as you can't connect more than once from the same port.</p> |
|
Used to pass an 'in' argument: A parameter for the access control type, to be interpreted as specified in the documentation for the Socket_Access_Control enum. |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL , a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
void (*tp_cli_channel_type_stream_tube_callback_for_offer) (TpChannel *proxy
,const GError *error
,gpointer user_data
,GObject *weak_object
);
Signature of the callback called when a Offer method call succeeds or fails.
|
the proxy on which the call was made |
|
NULL on success, or an error on failure
|
|
user-supplied data |
|
user-supplied object |
void (*tp_cli_channel_type_stream_tube_callback_for_accept) (TpChannel *proxy
,const GValue *out_address
,const GError *error
,gpointer user_data
,GObject *weak_object
);
Signature of the callback called when a Accept method call succeeds or fails.
|
the proxy on which the call was made |
|
Used to return an 'out' argument if error is NULL : The address on which the connection manager will listen for connections to this tube. The client should not attempt to connect to the address until the tube is open.
|
|
NULL on success, or an error on failure
|
|
user-supplied data |
|
user-supplied object |
TpProxySignalConnection * tp_cli_channel_type_stream_tube_connect_to_new_remote_connection (TpChannel *proxy
,tp_cli_channel_type_stream_tube_signal_callback_new_remote_connection callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
,GError **error
);
Connect a handler to the signal NewRemoteConnection.
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Emitted each time a participant opens a new connection to its socket.</p> <p>This signal is only fired on the offering side.</p>
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL , used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
TpProxySignalConnection * tp_cli_channel_type_stream_tube_connect_to_new_local_connection (TpChannel *proxy
,tp_cli_channel_type_stream_tube_signal_callback_new_local_connection callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
,GError **error
);
Connect a handler to the signal NewLocalConnection.
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Emitted when the tube application connects to the CM's socket.</p> <p>This signal is only fired on the accepting side.</p>
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL , used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
TpProxySignalConnection * tp_cli_channel_type_stream_tube_connect_to_connection_closed (TpChannel *proxy
,tp_cli_channel_type_stream_tube_signal_callback_connection_closed callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
,GError **error
);
Connect a handler to the signal ConnectionClosed.
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Emitted when a connection has been closed.</p>
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL , used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
void (*tp_cli_channel_type_stream_tube_signal_callback_new_remote_connection) (TpChannel *proxy
,guint arg_Handle
,const GValue *arg_Connection_Param
,guint arg_Connection_ID
,gpointer user_data
,GObject *weak_object
);
Represents the signature of a callback for the signal NewRemoteConnection.
|
The proxy on which tp_cli_channel_type_stream_tube_connect_to_new_remote_connection()
was called
|
|
The handle of the participant who opened the new connection |
|
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>A parameter which can be used by the listening process to identify the connection. Note that this parameter has a meaningful value only in the Socket_Access_Control_Port and Socket_Access_Control_Credentials cases. If a different Socket_Access_Control has been chosen when offering the tube, this parameter should be ignored.</p> <p>In the Socket_Access_Control_Port case, the variant contains a struct Socket_Address_IPv4 (or Socket_Address_IPv6) containing the address from which the CM is connected to the client application.</p> <p>In the Socket_Access_Control_Credentials case, the variant contains the byte (D-Bus signature 'y') that has been sent with the credentials.</p> |
|
The unique ID associated with this connection. This ID will be used to identifiy the connection when reporting errors with <tp:member-ref>ConnectionClosed</tp:member-ref>. |
|
User-supplied data |
|
User-supplied weakly referenced object |
void (*tp_cli_channel_type_stream_tube_signal_callback_new_local_connection) (TpChannel *proxy
,guint arg_Connection_ID
,gpointer user_data
,GObject *weak_object
);
Represents the signature of a callback for the signal NewLocalConnection.
|
The proxy on which tp_cli_channel_type_stream_tube_connect_to_new_local_connection()
was called
|
|
The unique ID associated with this connection. This ID will be used to identifiy the connection when reporting errors with <tp:member-ref>ConnectionClosed</tp:member-ref>. |
|
User-supplied data |
|
User-supplied weakly referenced object |
void (*tp_cli_channel_type_stream_tube_signal_callback_connection_closed) (TpChannel *proxy
,guint arg_Connection_ID
,const gchar *arg_Error
,const gchar *arg_Message
,gpointer user_data
,GObject *weak_object
);
Represents the signature of a callback for the signal ConnectionClosed.
|
The proxy on which tp_cli_channel_type_stream_tube_connect_to_connection_closed()
was called
|
|
The ID of the connection. |
|
<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>The name of a D-Bus error describing the error that occurred.</p> <p>The following errors can be used:</p> <ul> <li><code>org.freedesktop.Telepathy.Error.Cancelled</code>: user closed the socket or the tube.</li> <li><code>org.freedesktop.Telepathy.Error.ConnectionLost</code>: the bytestream relaying connection's data has been broken.</li> <li><code>org.freedesktop.Telepathy.Error.ConnectionRefused</code>: the tube offer refused the connection.</li> </ul> |
|
A debug message. |
|
User-supplied data |
|
User-supplied weakly referenced object |
gboolean tp_cli_channel_type_dbus_tube_run_offer (TpChannel *proxy
,gint timeout_ms
,GHashTable *in_parameters
,guint in_access_control
,gchar **out_address
,GError **error
,GMainLoop **loop
);
Call the method Offer and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
Offers a D-Bus tube providing the service specified.
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to pass an 'in' argument: The dictionary of arbitrary <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Interface.Tube">Parameters</tp:dbus-ref> to send with the tube offer. |
|
Used to pass an 'in' argument: The access control the connection manager applies to the D-Bus socket. |
|
Used to return an 'out' argument if TRUE is returned: The string describing the address of the private bus. The client SHOULD NOT attempt to connect to the address until the tube is open.
|
|
If not NULL , used to return errors if FALSE
is returned
|
|
If not NULL , set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit() , causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
gboolean tp_cli_channel_type_dbus_tube_run_accept (TpChannel *proxy
,gint timeout_ms
,guint in_access_control
,gchar **out_address
,GError **error
,GMainLoop **loop
);
Call the method Accept and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.
Accept a D-Bus tube that's in the "local pending" state. The connection manager will attempt to open the tube. The tube remains in the "local pending" state until the <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Interface.Tube">TubeChannelStateChanged</tp:dbus-ref> signal is emitted.
|
A TpChannel or subclass |
|
Timeout in milliseconds, or -1 for default |
|
Used to pass an 'in' argument: The access control the connection manager applies to the D-Bus socket. |
|
Used to return an 'out' argument if TRUE is returned: The string describing the address of the private bus. The client SHOULD NOT attempt to connect to the address until the tube is open.
|
|
If not NULL , used to return errors if FALSE
is returned
|
|
If not NULL , set before re-entering
the main loop, to point to a GMainLoop
which can be used to cancel this call with
g_main_loop_quit() , causing a return of
FALSE with error set to TP_DBUS_ERROR_CANCELLED
|
Returns : |
TRUE on success, FALSE and sets error on error
|
TpProxyPendingCall * tp_cli_channel_type_dbus_tube_call_offer (TpChannel *proxy
,gint timeout_ms
,GHashTable *in_parameters
,guint in_access_control
,tp_cli_channel_type_dbus_tube_callback_for_offer callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
);
Start a Offer method call.
Offers a D-Bus tube providing the service specified.
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
Used to pass an 'in' argument: The dictionary of arbitrary <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Interface.Tube">Parameters</tp:dbus-ref> to send with the tube offer. |
|
Used to pass an 'in' argument: The access control the connection manager applies to the D-Bus socket. |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL , a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
TpProxyPendingCall * tp_cli_channel_type_dbus_tube_call_accept (TpChannel *proxy
,gint timeout_ms
,guint in_access_control
,tp_cli_channel_type_dbus_tube_callback_for_accept callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
);
Start a Accept method call.
Accept a D-Bus tube that's in the "local pending" state. The connection manager will attempt to open the tube. The tube remains in the "local pending" state until the <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel.Interface.Tube">TubeChannelStateChanged</tp:dbus-ref> signal is emitted.
|
the TpProxy |
|
the timeout in milliseconds, or -1 to use the default |
|
Used to pass an 'in' argument: The access control the connection manager applies to the D-Bus socket. |
|
called when the method call succeeds or fails;
may be NULL to make a "fire and forget" call with no
reply tracking
|
|
user-supplied data passed to the callback;
must be NULL if callback is NULL
|
|
called with the user_data as argument, after the
call has succeeded, failed or been cancelled;
must be NULL if callback is NULL
|
|
If not NULL , a GObject which will be
weakly referenced; if it is destroyed, this call
will automatically be cancelled. Must be NULL if
callback is NULL
|
Returns : |
a TpProxyPendingCall representing the call in progress. It is borrowed from the object, and will become invalid when the callback is called, the call is cancelled or the TpProxy becomes invalid. |
void (*tp_cli_channel_type_dbus_tube_callback_for_offer) (TpChannel *proxy
,const gchar *out_address
,const GError *error
,gpointer user_data
,GObject *weak_object
);
Signature of the callback called when a Offer method call succeeds or fails.
|
the proxy on which the call was made |
|
Used to return an 'out' argument if error is NULL : The string describing the address of the private bus. The client SHOULD NOT attempt to connect to the address until the tube is open.
|
|
NULL on success, or an error on failure
|
|
user-supplied data |
|
user-supplied object |
void (*tp_cli_channel_type_dbus_tube_callback_for_accept) (TpChannel *proxy
,const gchar *out_address
,const GError *error
,gpointer user_data
,GObject *weak_object
);
Signature of the callback called when a Accept method call succeeds or fails.
|
the proxy on which the call was made |
|
Used to return an 'out' argument if error is NULL : The string describing the address of the private bus. The client SHOULD NOT attempt to connect to the address until the tube is open.
|
|
NULL on success, or an error on failure
|
|
user-supplied data |
|
user-supplied object |
TpProxySignalConnection * tp_cli_channel_type_dbus_tube_connect_to_dbus_names_changed (TpChannel *proxy
,tp_cli_channel_type_dbus_tube_signal_callback_dbus_names_changed callback
,gpointer user_data
,GDestroyNotify destroy
,GObject *weak_object
,GError **error
);
Connect a handler to the signal DBusNamesChanged.
Emitted on a multi-user (i.e. Handle_Type_Room) D-Bus tube when a participant opens or closes the tube. This provides change notification for the <tp:member-ref>DBusNames</tp:member-ref> property.
|
A TpChannel or subclass |
|
Callback to be called when the signal is received |
|
User-supplied data for the callback |
|
Destructor for the user-supplied data, which
will be called when this signal is disconnected, or
before this function returns NULL
|
|
A GObject which will be weakly referenced; if it is destroyed, this callback will automatically be disconnected |
|
If not NULL , used to raise an error if NULL is
returned
|
Returns : |
a TpProxySignalConnection containing all of the
above, which can be used to disconnect the signal; or
NULL if the proxy does not have the desired interface
or has become invalid.
|
void (*tp_cli_channel_type_dbus_tube_signal_callback_dbus_names_changed) (TpChannel *proxy
,GHashTable *arg_Added
,const GArray *arg_Removed
,gpointer user_data
,GObject *weak_object
);
Represents the signature of a callback for the signal DBusNamesChanged.
|
The proxy on which tp_cli_channel_type_dbus_tube_connect_to_dbus_names_changed()
was called
|
|
Array of handles and D-Bus names of new participants. |
|
Array of handles of former participants. |
|
User-supplied data |
|
User-supplied weakly referenced object |