TpConnectionNameListCb ()

void                (*TpConnectionNameListCb)           (const gchar * const *names,
                                                         gsize n,
                                                         const gchar * const *cms,
                                                         const gchar * const *protocols,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback supplied to tp_list_connection_names().

Since 0.7.1

tp_list_connection_names ()

void                tp_list_connection_names            (TpDBusDaemon *bus_daemon,
                                                         TpConnectionNameListCb callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

List the bus names of all the connections that currently exist, together with the connection manager name and the protocol name for each connection. Call the callback when done.

The bus names passed to the callback can be used to construct TpConnection objects for any connections that are of interest.

Since 0.7.1

tp_connection_new ()

TpConnection *      tp_connection_new                   (TpDBusDaemon *dbus,
                                                         const gchar *bus_name,
                                                         const gchar *object_path,
                                                         GError **error);

Since 0.7.1

tp_connection_run_until_ready ()

gboolean            tp_connection_run_until_ready       (TpConnection *self,
                                                         gboolean connect,
                                                         GError **error,
                                                         GMainLoop **loop);

If self is connected and ready for use, return immediately. Otherwise, call Connect() (unless connect is FALSE) and re-enter the main loop until the connection becomes invalid, the connection connects successfully and is introspected, or the main loop stored via loop is cancelled.

Since 0.7.1

TpConnectionWhenReadyCb ()

void                (*TpConnectionWhenReadyCb)          (TpConnection *connection,
                                                         const GError *error,
                                                         gpointer user_data);

Signature of a callback passed to tp_connection_call_when_ready(), which will be called exactly once, when the connection becomes ready or invalid (whichever happens first)

tp_connection_call_when_ready ()

void                tp_connection_call_when_ready       (TpConnection *self,
                                                         TpConnectionWhenReadyCb callback,
                                                         gpointer user_data);

If self is ready for use or has been invalidated, call callback immediately, then return. Otherwise, arrange for callback to be called when self either becomes ready for use or becomes invalid.

Note that if the connection is not in state CONNECTED, the callback will not be called until the connection either goes to state CONNECTED or is invalidated (e.g. by going to state DISCONNECTED or by becoming unreferenced). In particular, this method does not call Connect(). Call tp_cli_connection_call_connect() too, if you want to do that.

Since 0.7.7

tp_connection_is_ready ()

gboolean            tp_connection_is_ready              (TpConnection *self);

Returns the same thing as the "connection-ready" property.

Since 0.7.17

tp_connection_get_status ()

TpConnectionStatus  tp_connection_get_status            (TpConnection *self,
                                                         TpConnectionStatusReason *reason);

If reason is not NULL it is set to the reason why "status" changed to its current value, or TP_CONNECTION_STATUS_REASON_NONE_SPECIFIED if unknown.

Since 0.7.14

tp_connection_get_self_handle ()

TpHandle            tp_connection_get_self_handle       (TpConnection *self);

Return the TP_HANDLE_TYPE_CONTACT handle of the local user on this connection, or 0 if the connection is not ready (the TpConnection:connection-ready property is false) or has become invalid (the TpProxy::invalidated signal).

The returned handle is not necessarily valid forever (the notify::self-handle signal will be emitted if it changes, which can happen on protocols such as IRC). Construct a TpContact object if you want to track the local user's identifier in the protocol, or other information like their presence status, over time.

Since 0.7.26

TpConnectionRequestHandlesCb ()

void                (*TpConnectionRequestHandlesCb)     (TpConnection *connection,
                                                         TpHandleType handle_type,
                                                         guint n_handles,
                                                         const TpHandle *handles,
                                                         const gchar * const *ids,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when tp_connection_request_handles() succeeds or fails.

On success, the caller has one reference to each handle in handles, which may be released later with tp_connection_unref_handles(). If not released, the handles will remain valid until connection becomes invalid (signalled by TpProxy::invalidated).

For convenience, the handle type and IDs requested by the caller are passed through to this callback, so the caller does not have to include them in user_data.

tp_connection_request_handles ()

void                tp_connection_request_handles       (TpConnection *self,
                                                         gint timeout_ms,
                                                         TpHandleType handle_type,
                                                         const gchar * const *ids,
                                                         TpConnectionRequestHandlesCb callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Request the handles corresponding to the given identifiers, and if they are valid, hold (ensure a reference to) the corresponding handles.

If they are valid, the callback will later be called with the given handles; if not all of them are valid, the callback will be called with an error.

TpConnectionHoldHandlesCb ()

void                (*TpConnectionHoldHandlesCb)        (TpConnection *connection,
                                                         TpHandleType handle_type,
                                                         guint n_handles,
                                                         const TpHandle *handles,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when tp_connection_hold_handles() succeeds or fails.

On success, the caller has one reference to each handle in handles, which may be released later with tp_connection_unref_handles(). If not released, the handles will remain valid until connection becomes invalid (signalled by "invalidated").

For convenience, the handle type and handles requested by the caller are passed through to this callback on success, so the caller does not have to include them in user_data.

tp_connection_get_contact_attributes ()

void                tp_connection_get_contact_attributes
                                                        (TpConnection *self,
                                                         gint timeout_ms,
                                                         guint n_handles,
                                                         const TpHandle *handles,
                                                         const gchar * const *interfaces,
                                                         gboolean hold,
                                                         tp_cli_connection_interface_contacts_callback_for_get_contact_attributes callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Return (via a callback) any number of attributes of the given handles, and if they are valid and hold is TRUE, hold a reference to them.

This is a thin wrapper around the GetContactAttributes D-Bus method, and should be used in preference to tp_cli_connection_interface_contacts_get_contact_attributes(); mixing this function, tp_connection_hold_handles(), tp_connection_unref_handles(), and TpContact with direct use of the RequestHandles, HoldHandles and GetContactAttributes D-Bus methods is unwise, as TpConnection and TpContact perform client-side reference counting of handles. The TpContact API provides a higher-level abstraction which should usually be used instead.

callback will later be called with the attributes of those of the given handles that were valid. Invalid handles are simply omitted from the parameter to the callback.

If hold is TRUE, the callback is given one reference to each handle that appears as a key in the callback's attributes parameter.

tp_connection_hold_handles ()

void                tp_connection_hold_handles          (TpConnection *self,
                                                         gint timeout_ms,
                                                         TpHandleType handle_type,
                                                         guint n_handles,
                                                         const TpHandle *handles,
                                                         TpConnectionHoldHandlesCb callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Hold (ensure a reference to) the given handles, if they are valid.

If they are valid, the callback will later be called with the given handles; if not all of them are valid, the callback will be called with an error.

This function, along with tp_connection_unref_handles(), tp_connection_get_contact_attributes() and TpContact, keeps a client-side reference count of handles; you should not use the RequestHandles, HoldHandles and GetContactAttributes D-Bus methods directly as well as these functions.

tp_connection_unref_handles ()

void                tp_connection_unref_handles         (TpConnection *self,
                                                         TpHandleType handle_type,
                                                         guint n_handles,
                                                         const TpHandle *handles);

Release the reference to the handles in handles that was obtained by calling tp_connection_hold_handles() or tp_connection_request_handles().

This function might release any references held by calling tp_cli_connection_call_request_handles(), tp_cli_connection_run_request_handles(), tp_cli_connection_call_hold_handles(), tp_cli_connection_run_hold_handles(), tp_cli_connection_interface_contacts_call_get_contact_attributes() or tp_cli_connection_interface_contacts_run_get_contact_attributes() directly. Those functions should be avoided in favour of using TpContact, tp_connection_hold_handles(), tp_connection_request_handles() and tp_connection_get_contact_attributes(), which along with this function perform client-side reference counting of handles.

If self has already become invalid, this function does nothing.

tp_connection_init_known_interfaces ()

void                tp_connection_init_known_interfaces (void);

Ensure that the known interfaces for TpConnection have been set up. This is done automatically when necessary, but for correct overriding of library interfaces by local extensions, you should call this function before calling tp_proxy_or_subclass_hook_on_interface_add() with first argument TP_TYPE_CONNECTION.

Since 0.7.6

tp_connection_presence_type_cmp_availability ()

gint                tp_connection_presence_type_cmp_availability
                                                        (TpConnectionPresenceType p1,
                                                         TpConnectionPresenceType p2);

Compares p1 and p2 like strcmp(). p1 > p2 means p1 is more available than p2.

The order used is: available > busy > away > xa > hidden > offline > error > unknown > unset

Since 0.7.16

tp_connection_parse_object_path ()

gboolean            tp_connection_parse_object_path     (TpConnection *self,
                                                         gchar **protocol,
                                                         gchar **cm_name);

If the object path of connection is in the correct form, set protocol and cm_name, return TRUE. Otherwise leave them unchanged and return FALSE.

Since 0.7.27

TpConnection

typedef struct _TpConnection TpConnection;

A proxy object for a Telepathy connection.

(Changed in 0.7.12: the layout of the structure is visible, allowing subclassing.)

Since 0.7.1

TpConnectionClass

typedef struct {
    TpProxyClass parent_class;
} TpConnectionClass;

The class of a TpConnection. In addition to parent_class there are four pointers reserved for possible future use.

(Changed in 0.7.12: the layout of the structure is visible, allowing subclassing.)

Since 0.7.1

TP_UNKNOWN_CONNECTION_STATUS

#define TP_UNKNOWN_CONNECTION_STATUS ((TpConnectionStatus) -1)

An invalid connection status used in TpConnection to indicate that the status has not yet been discovered.

Since 0.7.1

TP_ERRORS_DISCONNECTED

#define TP_ERRORS_DISCONNECTED (tp_errors_disconnected_quark ())

GError domain representing a Telepathy connection becoming disconnected. The code in a GError with this domain must be a member of TpConnectionStatusReason.

This macro expands to a function call returning a GQuark.

Since 0.7.1

tp_cli_connection_callback_for_connect ()

void                (*tp_cli_connection_callback_for_connect)
                                                        (TpConnection *proxy,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a Connect method call succeeds or fails.

tp_cli_connection_call_connect ()

TpProxyPendingCall * tp_cli_connection_call_connect     (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         tp_cli_connection_callback_for_connect callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a Connect method call.

<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Request that the connection be established. This will be done asynchronously and errors will be returned by emitting <tp:member-ref>StatusChanged</tp:member-ref> signals.</p> <p>Calling this method on a Connection that is already connecting or connected is allowed, and has no effect.</p>

tp_cli_connection_run_connect ()

gboolean            tp_cli_connection_run_connect       (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method Connect and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Request that the connection be established. This will be done asynchronously and errors will be returned by emitting <tp:member-ref>StatusChanged</tp:member-ref> signals.</p> <p>Calling this method on a Connection that is already connecting or connected is allowed, and has no effect.</p>

tp_cli_connection_callback_for_disconnect ()

void                (*tp_cli_connection_callback_for_disconnect)
                                                        (TpConnection *proxy,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a Disconnect method call succeeds or fails.

tp_cli_connection_call_disconnect ()

TpProxyPendingCall * tp_cli_connection_call_disconnect  (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         tp_cli_connection_callback_for_disconnect callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a Disconnect method call.

Request that the connection be closed. This closes the connection if it's not already in DISCONNECTED state, and destroys the connection object.

tp_cli_connection_run_disconnect ()

gboolean            tp_cli_connection_run_disconnect    (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method Disconnect and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

Request that the connection be closed. This closes the connection if it's not already in DISCONNECTED state, and destroys the connection object.

tp_cli_connection_callback_for_get_interfaces ()

void                (*tp_cli_connection_callback_for_get_interfaces)
                                                        (TpConnection *proxy,
                                                         const gchar **out_Interfaces,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a GetInterfaces method call succeeds or fails.

tp_cli_connection_call_get_interfaces ()

TpProxyPendingCall * tp_cli_connection_call_get_interfaces
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         tp_cli_connection_callback_for_get_interfaces callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a GetInterfaces method call.

<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Returns the set of optional interfaces supported by this connection. See <tp:member-ref>Interfaces</tp:member-ref> for more details.</p>

tp_cli_connection_run_get_interfaces ()

gboolean            tp_cli_connection_run_get_interfaces
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         gchar ***out_Interfaces,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method GetInterfaces and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Returns the set of optional interfaces supported by this connection. See <tp:member-ref>Interfaces</tp:member-ref> for more details.</p>

tp_cli_connection_callback_for_get_protocol ()

void                (*tp_cli_connection_callback_for_get_protocol)
                                                        (TpConnection *proxy,
                                                         const gchar *out_Protocol,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a GetProtocol method call succeeds or fails.

tp_cli_connection_call_get_protocol ()

TpProxyPendingCall * tp_cli_connection_call_get_protocol
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         tp_cli_connection_callback_for_get_protocol callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a GetProtocol method call.

Get the protocol this connection is using.

tp_cli_connection_run_get_protocol ()

gboolean            tp_cli_connection_run_get_protocol  (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         gchar **out_Protocol,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method GetProtocol and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

Get the protocol this connection is using.

tp_cli_connection_callback_for_get_self_handle ()

void                (*tp_cli_connection_callback_for_get_self_handle)
                                                        (TpConnection *proxy,
                                                         guint out_Self_Handle,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a GetSelfHandle method call succeeds or fails.

tp_cli_connection_call_get_self_handle ()

TpProxyPendingCall * tp_cli_connection_call_get_self_handle
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         tp_cli_connection_callback_for_get_self_handle callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a GetSelfHandle method call.

Returns the value of the SelfHandle property. Change notification is via the SelfHandleChanged signal.

tp_cli_connection_run_get_self_handle ()

gboolean            tp_cli_connection_run_get_self_handle
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         guint *out_Self_Handle,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method GetSelfHandle and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

Returns the value of the SelfHandle property. Change notification is via the SelfHandleChanged signal.

tp_cli_connection_callback_for_get_status ()

void                (*tp_cli_connection_callback_for_get_status)
                                                        (TpConnection *proxy,
                                                         guint out_Status,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a GetStatus method call succeeds or fails.

tp_cli_connection_call_get_status ()

TpProxyPendingCall * tp_cli_connection_call_get_status  (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         tp_cli_connection_callback_for_get_status callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a GetStatus method call.

Get the current status as defined in the <tp:member-ref>StatusChanged</tp:member-ref> signal.

tp_cli_connection_run_get_status ()

gboolean            tp_cli_connection_run_get_status    (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         guint *out_Status,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method GetStatus and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

Get the current status as defined in the <tp:member-ref>StatusChanged</tp:member-ref> signal.

tp_cli_connection_callback_for_hold_handles ()

void                (*tp_cli_connection_callback_for_hold_handles)
                                                        (TpConnection *proxy,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a HoldHandles method call succeeds or fails.

tp_cli_connection_call_hold_handles ()

TpProxyPendingCall * tp_cli_connection_call_hold_handles
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         guint in_Handle_Type,
                                                         const GArray *in_Handles,
                                                         tp_cli_connection_callback_for_hold_handles callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a HoldHandles method call.

<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Notify the connection manger that your client is holding a copy of handles which may not be in use in any existing channel or list, and were not obtained by using the <tp:member-ref>RequestHandles</tp:member-ref> method. For example, a handle observed in an emitted signal, or displayed somewhere in the UI that is not associated with a channel. The connection manager must not deallocate a handle where any clients have used this method to indicate it is in use until the <tp:member-ref>ReleaseHandles</tp:member-ref> method is called, or the clients disappear from the bus.</p> <p>Note that HoldHandles is idempotent - calling it multiple times is equivalent to calling it once. If a handle is &quot;referenced&quot; by several components which share a D-Bus unique name, the client should perform reference counting internally, and only call ReleaseHandles when none of the cooperating components need the handle any longer.</p>

tp_cli_connection_run_hold_handles ()

gboolean            tp_cli_connection_run_hold_handles  (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         guint in_Handle_Type,
                                                         const GArray *in_Handles,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method HoldHandles and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Notify the connection manger that your client is holding a copy of handles which may not be in use in any existing channel or list, and were not obtained by using the <tp:member-ref>RequestHandles</tp:member-ref> method. For example, a handle observed in an emitted signal, or displayed somewhere in the UI that is not associated with a channel. The connection manager must not deallocate a handle where any clients have used this method to indicate it is in use until the <tp:member-ref>ReleaseHandles</tp:member-ref> method is called, or the clients disappear from the bus.</p> <p>Note that HoldHandles is idempotent - calling it multiple times is equivalent to calling it once. If a handle is &quot;referenced&quot; by several components which share a D-Bus unique name, the client should perform reference counting internally, and only call ReleaseHandles when none of the cooperating components need the handle any longer.</p>

tp_cli_connection_callback_for_inspect_handles ()

void                (*tp_cli_connection_callback_for_inspect_handles)
                                                        (TpConnection *proxy,
                                                         const gchar **out_Identifiers,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a InspectHandles method call succeeds or fails.

tp_cli_connection_call_inspect_handles ()

TpProxyPendingCall * tp_cli_connection_call_inspect_handles
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         guint in_Handle_Type,
                                                         const GArray *in_Handles,
                                                         tp_cli_connection_callback_for_inspect_handles callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a InspectHandles method call.

Return a string representation for a number of handles of a given type.

tp_cli_connection_run_inspect_handles ()

gboolean            tp_cli_connection_run_inspect_handles
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         guint in_Handle_Type,
                                                         const GArray *in_Handles,
                                                         gchar ***out_Identifiers,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method InspectHandles and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

Return a string representation for a number of handles of a given type.

tp_cli_connection_callback_for_list_channels ()

void                (*tp_cli_connection_callback_for_list_channels)
                                                        (TpConnection *proxy,
                                                         const GPtrArray *out_Channel_Info,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a ListChannels method call succeeds or fails.

tp_cli_connection_call_list_channels ()

TpProxyPendingCall * tp_cli_connection_call_list_channels
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         tp_cli_connection_callback_for_list_channels callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a ListChannels method call.

List all the channels which currently exist on this connection.

tp_cli_connection_run_list_channels ()

gboolean            tp_cli_connection_run_list_channels (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         GPtrArray **out_Channel_Info,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method ListChannels and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

List all the channels which currently exist on this connection.

tp_cli_connection_callback_for_release_handles ()

void                (*tp_cli_connection_callback_for_release_handles)
                                                        (TpConnection *proxy,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a ReleaseHandles method call succeeds or fails.

tp_cli_connection_call_release_handles ()

TpProxyPendingCall * tp_cli_connection_call_release_handles
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         guint in_Handle_Type,
                                                         const GArray *in_Handles,
                                                         tp_cli_connection_callback_for_release_handles callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a ReleaseHandles method call.

Explicitly notify the connection manager that your client is no longer holding any references to the given handles, and that they may be deallocated if they are not held by any other clients or referenced by any existing channels. See HoldHandles for notes.

tp_cli_connection_run_release_handles ()

gboolean            tp_cli_connection_run_release_handles
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         guint in_Handle_Type,
                                                         const GArray *in_Handles,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method ReleaseHandles and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

Explicitly notify the connection manager that your client is no longer holding any references to the given handles, and that they may be deallocated if they are not held by any other clients or referenced by any existing channels. See HoldHandles for notes.

tp_cli_connection_callback_for_request_channel ()

void                (*tp_cli_connection_callback_for_request_channel)
                                                        (TpConnection *proxy,
                                                         const gchar *out_Object_Path,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a RequestChannel method call succeeds or fails.

tp_cli_connection_call_request_channel ()

TpProxyPendingCall * tp_cli_connection_call_request_channel
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         const gchar *in_Type,
                                                         guint in_Handle_Type,
                                                         guint in_Handle,
                                                         gboolean in_Suppress_Handler,
                                                         tp_cli_connection_callback_for_request_channel callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a RequestChannel method call.

<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Request a channel satisfying the specified type and communicating with the contact, room, list etc. indicated by the given handle_type and handle. The handle_type and handle may both be zero to request the creation of a new, empty channel, which may or may not be possible, depending on the protocol and channel type.</p> <p>On success, the returned channel will always be of the requested type (i.e. implement the requested channel-type interface).</p> <p>If a new, empty channel is requested, on success the returned channel will always be an &quot;anonymous&quot; channel for which the type and handle are both zero.</p> <p>If a channel to a contact, room etc. is requested, on success, the returned channel may either be a new or existing channel to the requested entity (i.e. its <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel">TargetHandleType</tp:dbus-ref> and <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel">TargetHandle</tp:dbus-ref> properties are the requested handle type and handle), or a newly created &quot;anonymous&quot; channel associated with the requested handle in some implementation-specific way.</p> <p>For example, for a contact handle, the returned channel might be &quot;anonymous&quot;, but implement the groups interface and have the requested contact already present among the members.</p> <p>If the request cannot be satisfied, an error is raised and no channel is created.</p>

tp_cli_connection_run_request_channel ()

gboolean            tp_cli_connection_run_request_channel
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         const gchar *in_Type,
                                                         guint in_Handle_Type,
                                                         guint in_Handle,
                                                         gboolean in_Suppress_Handler,
                                                         gchar **out_Object_Path,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method RequestChannel and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Request a channel satisfying the specified type and communicating with the contact, room, list etc. indicated by the given handle_type and handle. The handle_type and handle may both be zero to request the creation of a new, empty channel, which may or may not be possible, depending on the protocol and channel type.</p> <p>On success, the returned channel will always be of the requested type (i.e. implement the requested channel-type interface).</p> <p>If a new, empty channel is requested, on success the returned channel will always be an &quot;anonymous&quot; channel for which the type and handle are both zero.</p> <p>If a channel to a contact, room etc. is requested, on success, the returned channel may either be a new or existing channel to the requested entity (i.e. its <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel">TargetHandleType</tp:dbus-ref> and <tp:dbus-ref namespace="org.freedesktop.Telepathy.Channel">TargetHandle</tp:dbus-ref> properties are the requested handle type and handle), or a newly created &quot;anonymous&quot; channel associated with the requested handle in some implementation-specific way.</p> <p>For example, for a contact handle, the returned channel might be &quot;anonymous&quot;, but implement the groups interface and have the requested contact already present among the members.</p> <p>If the request cannot be satisfied, an error is raised and no channel is created.</p>

tp_cli_connection_callback_for_request_handles ()

void                (*tp_cli_connection_callback_for_request_handles)
                                                        (TpConnection *proxy,
                                                         const GArray *out_Handles,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a RequestHandles method call succeeds or fails.

tp_cli_connection_call_request_handles ()

TpProxyPendingCall * tp_cli_connection_call_request_handles
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         guint in_Handle_Type,
                                                         const gchar **in_Identifiers,
                                                         tp_cli_connection_callback_for_request_handles callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a RequestHandles method call.

Request several handles from the connection manager which represent a number of contacts, rooms or server-stored lists on the service. The connection manager should record that these handles are in use by the client who invokes this method, and must not deallocate the handles until the client disconnects from the bus or calls the <tp:member-ref>ReleaseHandles</tp:member-ref> method. Where the identifier refers to an entity that already has a handle in this connection manager, this handle should be returned instead. The handle number 0 must not be returned by the connection manager.

tp_cli_connection_run_request_handles ()

gboolean            tp_cli_connection_run_request_handles
                                                        (TpConnection *proxy,
                                                         gint timeout_ms,
                                                         guint in_Handle_Type,
                                                         const gchar **in_Identifiers,
                                                         GArray **out_Handles,
                                                         GError **error,
                                                         GMainLoop **loop);

Call the method RequestHandles and run the main loop until it returns. Before calling this method, you must add a reference to any borrowed objects you need to keep, and generally ensure that everything is in a consistent state.

Request several handles from the connection manager which represent a number of contacts, rooms or server-stored lists on the service. The connection manager should record that these handles are in use by the client who invokes this method, and must not deallocate the handles until the client disconnects from the bus or calls the <tp:member-ref>ReleaseHandles</tp:member-ref> method. Where the identifier refers to an entity that already has a handle in this connection manager, this handle should be returned instead. The handle number 0 must not be returned by the connection manager.

tp_cli_connection_signal_callback_new_channel ()

void                (*tp_cli_connection_signal_callback_new_channel)
                                                        (TpConnection *proxy,
                                                         const gchar *arg_Object_Path,
                                                         const gchar *arg_Channel_Type,
                                                         guint arg_Handle_Type,
                                                         guint arg_Handle,
                                                         gboolean arg_Suppress_Handler,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Represents the signature of a callback for the signal NewChannel.

tp_cli_connection_connect_to_new_channel ()

TpProxySignalConnection * tp_cli_connection_connect_to_new_channel
                                                        (TpConnection *proxy,
                                                         tp_cli_connection_signal_callback_new_channel callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object,
                                                         GError **error);

Connect a handler to the signal NewChannel.

Emitted when a new Channel object is created, either through user request or incoming information from the service.

tp_cli_connection_signal_callback_self_handle_changed ()

void                (*tp_cli_connection_signal_callback_self_handle_changed)
                                                        (TpConnection *proxy,
                                                         guint arg_Self_Handle,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Represents the signature of a callback for the signal SelfHandleChanged.

tp_cli_connection_connect_to_self_handle_changed ()

TpProxySignalConnection * tp_cli_connection_connect_to_self_handle_changed
                                                        (TpConnection *proxy,
                                                         tp_cli_connection_signal_callback_self_handle_changed callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object,
                                                         GError **error);

Connect a handler to the signal SelfHandleChanged.

Emitted whenever the <tp:member-ref>SelfHandle</tp:member-ref> property changes. If the connection is not yet in the CONNECTED state, this signal is not guaranteed to be emitted.

tp_cli_connection_signal_callback_status_changed ()

void                (*tp_cli_connection_signal_callback_status_changed)
                                                        (TpConnection *proxy,
                                                         guint arg_Status,
                                                         guint arg_Reason,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Represents the signature of a callback for the signal StatusChanged.

tp_cli_connection_connect_to_status_changed ()

TpProxySignalConnection * tp_cli_connection_connect_to_status_changed
                                                        (TpConnection *proxy,
                                                         tp_cli_connection_signal_callback_status_changed callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object,
                                                         GError **error);

Connect a handler to the signal StatusChanged.

Emitted when the status of the connection changes. All states and reasons have numerical values, as defined in ConnectionStatus and ConnectionStatusReason.

tp_cli_connection_signal_callback_connection_error ()

void                (*tp_cli_connection_signal_callback_connection_error)
                                                        (TpConnection *proxy,
                                                         const gchar *arg_Error,
                                                         GHashTable *arg_Details,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Represents the signature of a callback for the signal ConnectionError.

tp_cli_connection_connect_to_connection_error ()

TpProxySignalConnection * tp_cli_connection_connect_to_connection_error
                                                        (TpConnection *proxy,
                                                         tp_cli_connection_signal_callback_connection_error callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object,
                                                         GError **error);

Connect a handler to the signal ConnectionError.

<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Emitted when an error occurs that renders this connection unusable. </p> <p>Whenever this signal is emitted, it MUST immediately be followed by a <tp:member-ref>StatusChanged</tp:member-ref> signal with status Connection_Status_Disconnected and an appropriate reason code.</p> <p>Connection managers SHOULD emit this signal on disconnection, but need not do so. Clients MUST support connection managers that emit StatusChanged(Disconnected, ...) without first emitting ConnectionError.</p> <tp:rationale> <p>This signal provides additional information about the reason for disconnection. The reason for connection is always straightforward - it was requested - so it does not need further explanation. However, on errors, it can be useful to provide additional information.</p> <p>The <tp:type>Connection_Status_Reason</tp:type> is not given here, since it will be signalled in <tp:member-ref>StatusChanged</tp:member-ref>. A reasonable client implementation would be to store the information given by this signal until StatusChanged is received, at which point the information given by this signal can be used to supplement the StatusChanged signal.</p> </tp:rationale>

The "connection-ready" property

  "connection-ready"         gboolean              : Read

Initially FALSE; changes to TRUE when the connection has gone to CONNECTED status, introspection has finished and it's ready for use.

By the time this property becomes TRUE, any extra interfaces will have been set up and the "interfaces" property will have been populated.

Default value: FALSE

The "self-handle" property

  "self-handle"              guint                 : Read

The TP_HANDLE_TYPE_CONTACT handle of the local user on this connection, or 0 if we don't know yet or if the connection has become invalid.

Default value: 0

The "status" property

  "status"                   guint                 : Read

This connection's status, or TP_UNKNOWN_CONNECTION_STATUS if we don't know yet.

Default value: 4294967295

The "status-reason" property

  "status-reason"            guint                 : Read

The reason why "status" changed to its current value, or TP_CONNECTION_STATUS_REASON_NONE_SPECIFIED if unknown. know yet.

Default value: 0