TpAccount

typedef struct _TpAccount TpAccount;

The Telepathy Account Manager stores the user's configured real-time communication accounts. This object represents a stored account.

If this account is deleted from the account manager, the "invalidated" signal will be emitted with the domain TP_DBUS_ERRORS and the error code TP_DBUS_ERROR_OBJECT_REMOVED.

One can connect to the "notify" signal to get change notifications for many of the properties on this object. Refer to each property's documentation for whether it can be used in this way.

TpAccount objects should normally be obtained from the TpAccountManager.

Since 0.16, TpAccount always has a non-NULL "factory", and its "factory" will be propagated to its TpConnection (if any). If a TpAccount is created without going via the TpAccountManager or specifying a "factory", the default is to use a new TpAutomaticClientFactory.

Since 0.7.32

struct TpAccountClass

struct TpAccountClass {
};

The class of a TpAccount.

tp_account_new ()

TpAccount *         tp_account_new                      (TpDBusDaemon *bus_daemon,
                                                         const gchar *object_path,
                                                         GError **error);

Convenience function to create a new account proxy. The returned TpAccount is not guaranteed to be ready at the point of return.

tp_account_init_known_interfaces ()

void                tp_account_init_known_interfaces    (void);

Ensure that the known interfaces for TpAccount have been set up. This is done automatically when necessary, but for correct overriding of library interfaces by local extensions, you should call this function before calling tp_proxy_or_subclass_hook_on_interface_add() with first argument TP_TYPE_ACCOUNT.

Since 0.7.32

tp_account_parse_object_path ()

gboolean            tp_account_parse_object_path        (const gchar *object_path,
                                                         gchar **cm,
                                                         gchar **protocol,
                                                         gchar **account_id,
                                                         GError **error);

Validates and parses a Telepathy Account's object path, extracting the connection manager's name, the protocol, and the account's unique identifier from the path. This includes replacing underscores with hyphens in the protocol name, as defined in the Account specification.

Any of the out parameters may be NULL if not needed. If TRUE is returned, the caller is responsible for freeing the strings stored in any non-NULL out parameters, using g_free().

Since 0.9.0

tp_account_get_path_suffix ()

const gchar *       tp_account_get_path_suffix          (TpAccount *account);

Returns the portion of account's object path after the standard TP_ACCOUNT_OBJECT_PATH_BASE prefix, of the form "cm/protocol/acct". This string uniquely identifies the account.

This function is only intended to be used when printing debug messages or in tools for developer. For a string suitable for displaying to the user, see tp_account_get_display_name(). To retrieve the connection manager and protocol name parts of the object path, see tp_account_get_connection_manager() and tp_account_get_protocol(). For persistent identification of the account, use tp_proxy_get_object_path().

Since 0.13.9

tp_account_get_connection ()

TpConnection *      tp_account_get_connection           (TpAccount *account);

Since 0.9.0

tp_account_ensure_connection ()

TpConnection *      tp_account_ensure_connection        (TpAccount *account,
                                                         const gchar *path);

Set the connection of the account by specifying the connection object path. This function does not return a new ref and it is not guaranteed that the returned TpConnection object is ready.

The use-case for this function is in a HandleChannels callback and you already know the object path for the connection, so you can let account create its TpConnection and return it for use.

Since 0.9.0

tp_account_get_display_name ()

const gchar *       tp_account_get_display_name         (TpAccount *account);

Since 0.9.0

tp_account_get_connection_manager ()

const gchar *       tp_account_get_connection_manager   (TpAccount *account);

Since 0.9.0

tp_account_get_cm_name ()

const gchar *       tp_account_get_cm_name              (TpAccount *account);

Since 0.19.3

tp_account_get_protocol ()

const gchar *       tp_account_get_protocol             (TpAccount *account);

Since 0.9.0

tp_account_get_protocol_name ()

const gchar *       tp_account_get_protocol_name        (TpAccount *account);

Since 0.19.3

tp_account_get_icon_name ()

const gchar *       tp_account_get_icon_name            (TpAccount *account);

Since 0.9.0

tp_account_get_service ()

const gchar *       tp_account_get_service              (TpAccount *self);

Since 0.11.9

tp_account_set_enabled_async ()

void                tp_account_set_enabled_async        (TpAccount *account,
                                                         gboolean enabled,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous set of the Enabled property of account. When the operation is finished, callback will be called. You can then call tp_account_set_enabled_finish() to get the result of the operation.

Since 0.9.0

tp_account_set_enabled_finish ()

gboolean            tp_account_set_enabled_finish       (TpAccount *account,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async set of the Enabled property.

Since 0.9.0

tp_account_reconnect_async ()

void                tp_account_reconnect_async          (TpAccount *account,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous reconnect of account. When the operation is finished, callback will be called. You can then call tp_account_reconnect_finish() to get the result of the operation.

Since 0.9.0

tp_account_reconnect_finish ()

gboolean            tp_account_reconnect_finish         (TpAccount *account,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async reconnect of account.

Since 0.9.0

tp_account_is_enabled ()

gboolean            tp_account_is_enabled               (TpAccount *account);

Since 0.9.0

tp_account_is_valid ()

gboolean            tp_account_is_valid                 (TpAccount *account);

Since 0.9.0

tp_account_update_parameters_async ()

void                tp_account_update_parameters_async  (TpAccount *account,
                                                         GHashTable *parameters,
                                                         const gchar **unset_parameters,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous update of parameters of account. When the operation is finished, callback will be called. You can then call tp_account_update_parameters_finish() to get the result of the operation.

Since 0.9.0

tp_account_update_parameters_finish ()

gboolean            tp_account_update_parameters_finish (TpAccount *account,
                                                         GAsyncResult *result,
                                                         gchar ***reconnect_required,
                                                         GError **error);

Finishes an async update of the parameters on account.

Since 0.9.0

tp_account_update_parameters_vardict_async ()

void                tp_account_update_parameters_vardict_async
                                                        (TpAccount *account,
                                                         GVariant *parameters,
                                                         const gchar **unset_parameters,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous update of parameters of account. When the operation is finished, callback will be called. You can then call tp_account_update_parameters_finish() to get the result of the operation.

If parameters is a floating reference (see g_variant_ref_sink()), ownership of parameters is taken by this function. This means you can pass the result of g_variant_new() or g_variant_new_parsed() directly to this function without additional reference-count management.

Since 0.17.6

tp_account_update_parameters_vardict_finish ()

gboolean            tp_account_update_parameters_vardict_finish
                                                        (TpAccount *account,
                                                         GAsyncResult *result,
                                                         gchar ***reconnect_required,
                                                         GError **error);

Finishes an async update of the parameters on account.

Since 0.17.6

tp_account_remove_async ()

void                tp_account_remove_async             (TpAccount *account,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous removal of account. When the operation is finished, callback will be called. You can then call tp_account_remove_finish() to get the result of the operation.

Since 0.9.0

tp_account_remove_finish ()

gboolean            tp_account_remove_finish            (TpAccount *account,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async removal of account.

Since 0.9.0

tp_account_set_display_name_async ()

void                tp_account_set_display_name_async   (TpAccount *account,
                                                         const gchar *display_name,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous set of the DisplayName property of account. When the operation is finished, callback will be called. You can then call tp_account_set_display_name_finish() to get the result of the operation.

Since 0.9.0

tp_account_set_display_name_finish ()

gboolean            tp_account_set_display_name_finish  (TpAccount *account,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async set of the DisplayName property.

Since 0.9.0

tp_account_set_icon_name_async ()

void                tp_account_set_icon_name_async      (TpAccount *account,
                                                         const gchar *icon_name,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous set of the Icon property of account. When the operation is finished, callback will be called. You can then call tp_account_set_icon_name_finish() to get the result of the operation.

Since 0.9.0

tp_account_set_icon_name_finish ()

gboolean            tp_account_set_icon_name_finish     (TpAccount *account,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async set of the Icon parameter.

Since 0.9.0

tp_account_set_service_async ()

void                tp_account_set_service_async        (TpAccount *self,
                                                         const gchar *service,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous set of the Service property on self. When the operation is finished, callback will be called. You can then call tp_account_set_service_finish() to get the result of the operation.

Since 0.11.9

tp_account_set_service_finish ()

gboolean            tp_account_set_service_finish       (TpAccount *self,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async set of the Service parameter.

Since 0.11.9

tp_account_request_presence_async ()

void                tp_account_request_presence_async   (TpAccount *account,
                                                         TpConnectionPresenceType type,
                                                         const gchar *status,
                                                         const gchar *message,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous change of presence on account. When the operation is finished, callback will be called. You can then call tp_account_request_presence_finish() to get the result of the operation.

Since 0.9.0

tp_account_request_presence_finish ()

gboolean            tp_account_request_presence_finish  (TpAccount *account,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async presence change request on account.

Since 0.9.0

tp_account_set_automatic_presence_async ()

void                tp_account_set_automatic_presence_async
                                                        (TpAccount *account,
                                                         TpConnectionPresenceType type,
                                                         const gchar *status,
                                                         const gchar *message,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous change of account's automatic presence. When the operation is finished, callback will be called. You can then call tp_account_set_automatic_presence_finish() to get the result of the operation.

Since 0.13.8

tp_account_set_automatic_presence_finish ()

gboolean            tp_account_set_automatic_presence_finish
                                                        (TpAccount *account,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an asynchronous request to change the automatic presence of account.

Since 0.13.8

tp_account_get_connect_automatically ()

gboolean            tp_account_get_connect_automatically
                                                        (TpAccount *account);

Since 0.9.0

tp_account_set_connect_automatically_async ()

void                tp_account_set_connect_automatically_async
                                                        (TpAccount *account,
                                                         gboolean connect_automatically,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous set of the ConnectAutomatically property of account. When the operation is finished, callback will be called. You can then call tp_account_set_display_name_finish() to get the result of the operation.

Since 0.9.0

tp_account_set_connect_automatically_finish ()

gboolean            tp_account_set_connect_automatically_finish
                                                        (TpAccount *account,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async set of the ConnectAutomatically property.

Since 0.9.0

tp_account_get_has_been_online ()

gboolean            tp_account_get_has_been_online      (TpAccount *account);

Since 0.9.0

tp_account_get_connection_status ()

TpConnectionStatus  tp_account_get_connection_status    (TpAccount *account,
                                                         TpConnectionStatusReason *reason);

Gets the connection status and reason from account. The two values are the same as the "connection-status" and "connection-status-reason" properties.

Since 0.9.0

tp_account_get_detailed_error ()

const gchar *       tp_account_get_detailed_error       (TpAccount *self,
                                                         const GHashTable **details);

If the account's connection is not connected, return the D-Bus error name with which it last disconnected or failed to connect (in particular, this is TP_ERROR_STR_CANCELLED if it was disconnected by a user request). This is the same as "connection-error".

If details is not NULL, it will be used to return additional details about the error (the same as "connection-error-details").

Otherwise, return NULL, without altering details.

The returned string and details may become invalid when the main loop is re-entered or the account is destroyed.

Since 0.11.7

tp_account_dup_detailed_error_vardict ()

gchar *             tp_account_dup_detailed_error_vardict
                                                        (TpAccount *self,
                                                         GVariant **details);

If the account's connection is not connected, return the D-Bus error name with which it last disconnected or failed to connect (in particular, this is TP_ERROR_STR_CANCELLED if it was disconnected by a user request). This is the same as "connection-error".

If details is not NULL, it will be used to return additional details about the error (the same as "connection-error-details").

Otherwise, return NULL, without altering details.

The returned string and details may become invalid when the main loop is re-entered or the account is destroyed.

Since 0.17.6

tp_account_get_changing_presence ()

gboolean            tp_account_get_changing_presence    (TpAccount *self);

Since 0.11.6

tp_account_get_current_presence ()

TpConnectionPresenceType tp_account_get_current_presence
                                                        (TpAccount *account,
                                                         gchar **status,
                                                         gchar **status_message);

Gets the current presence, status and status message of account. These values are the same as the "current-presence-type", "current-status" and "current-status-message" properties.

Since 0.9.0

tp_account_get_requested_presence ()

TpConnectionPresenceType tp_account_get_requested_presence
                                                        (TpAccount *account,
                                                         gchar **status,
                                                         gchar **status_message);

Gets the requested presence, status and status message of account. These values are the same as the "requested-presence-type", "requested-status" and "requested-status-message" properties.

Since 0.9.0

tp_account_get_automatic_presence ()

TpConnectionPresenceType tp_account_get_automatic_presence
                                                        (TpAccount *self,
                                                         gchar **status,
                                                         gchar **status_message);

Gets the automatic presence, status and status message of account. These values are the same as the "automatic-presence-type", "automatic-status" and "automatic-status-message" properties, and are the values that will be used if the account should be put online automatically.

Since 0.13.8

tp_account_get_parameters ()

const GHashTable *  tp_account_get_parameters           (TpAccount *account);

Returns the parameters of the account, in a hash table where each string is the parameter name (account, password, require-encryption etc.), and each value is a GValue. Using the tp_asv_get family of functions (tp_asv_get_uint32(), tp_asv_get_string() etc.) to access the parameters is recommended.

The allowed parameters depend on the connection manager, and can be found via tp_connection_manager_get_protocol() and tp_connection_manager_protocol_get_param(). Well-known parameters are listed in the Telepathy D-Bus Interface Specification.

Since 0.9.0

tp_account_dup_parameters_vardict ()

GVariant *          tp_account_dup_parameters_vardict   (TpAccount *account);

Returns the parameters of the account, in a variant of type G_VARIANT_TYPE_VARDICT where the keys are parameter names (account, password, require-encryption etc.). Use g_variant_lookup() or g_variant_lookup_value() for convenient access to the values.

The allowed parameters depend on the connection manager, and can be found via tp_connection_manager_get_protocol() and tp_connection_manager_protocol_get_param(). Well-known parameters are listed in the Telepathy D-Bus Interface Specification.

Since 0.17.6

tp_account_get_nickname ()

const gchar *       tp_account_get_nickname             (TpAccount *account);

Since 0.9.0

tp_account_set_nickname_async ()

void                tp_account_set_nickname_async       (TpAccount *account,
                                                         const gchar *nickname,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous change of the Nickname parameter on account. When the operation is finished, callback will be called. You can then call tp_account_set_nickname_finish() to get the result of the operation.

Since 0.9.0

tp_account_set_nickname_finish ()

gboolean            tp_account_set_nickname_finish      (TpAccount *account,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async nickname change request on account.

Since 0.9.0

tp_account_get_normalized_name ()

const gchar *       tp_account_get_normalized_name      (TpAccount *self);

Since 0.13.8

tp_account_get_supersedes ()

const gchar * const * tp_account_get_supersedes         (TpAccount *self);

Return the same thing as the "supersedes" property, in a way that may be more convenient for C code.

The returned pointers are not guaranteed to remain valid after the main loop has been re-entered.

Since 0.17.5

tp_account_get_avatar_async ()

void                tp_account_get_avatar_async         (TpAccount *account,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous get of account's avatar. When the operation is finished, callback will be called. You can then call tp_account_get_avatar_finish() to get the result of the operation.

Since 0.9.0

tp_account_get_avatar_finish ()

const GArray *      tp_account_get_avatar_finish        (TpAccount *account,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async get operation of account's avatar.

Beware that the returned value is only valid until result is freed. Copy it with g_array_ref() if you need to keep it for longer.

Since 0.9.0

tp_account_set_avatar_async ()

void                tp_account_set_avatar_async         (TpAccount *self,
                                                         const guchar *avatar,
                                                         gsize len,
                                                         const gchar *mime_type,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous change of the Avatar parameter on self. When the operation is finished, callback will be called. You can then call tp_account_set_avatar_finish() to get the result of the operation.

If len equals 0, the avatar is cleared.

Since 0.11.1

tp_account_set_avatar_finish ()

gboolean            tp_account_set_avatar_finish        (TpAccount *self,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async avatar change request on account.

Since 0.11.1

tp_account_bind_connection_status_to_property ()

GBinding *          tp_account_bind_connection_status_to_property
                                                        (TpAccount *self,
                                                         gpointer target,
                                                         const char *target_property,
                                                         gboolean invert);

Binds the :connection-status of self to the boolean property of another object using a GBinding such that the target_property will be set to TRUE when self is connected (and invert is FALSE).

target_property will be synchronised immediately (G_BINDING_SYNC_CREATE). invert can be interpreted as analogous to G_BINDING_INVERT_BOOLEAN.

For instance, this function can be used to bind the GtkWidget:sensitive property to only make a widget sensitive when the account is connected.

See g_object_bind_property() for more information.

Since 0.13.16

TP_ACCOUNT_FEATURE_CORE

#define             TP_ACCOUNT_FEATURE_CORE

Expands to a call to a function that returns a quark for the "core" feature on a TpAccount.

When this feature is prepared, the basic properties of the Account have been retrieved and are available for use, and change-notification has been set up.

One can ask for a feature to be prepared using the tp_proxy_prepare_async() function, and waiting for it to callback.

Since 0.9.0

TP_ACCOUNT_FEATURE_CONNECTION

#define             TP_ACCOUNT_FEATURE_CONNECTION

Expands to a call to a function that returns a quark for the "connection" feature on a TpAccount.

When this feature is prepared, it is guaranteed that "connection" will always be either NULL or prepared. The account's "factory" will be used to create the TpConnection object and to determine its desired connection features. Change notification of the "connection" property will be delayed until all features (at least TP_CONNECTION_FEATURE_CORE) are prepared. See tp_simple_client_factory_add_account_features() to define which features needs to be prepared.

One can ask for a feature to be prepared using the tp_proxy_prepare_async() function, and waiting for it to callback.

Since 0.15.5

tp_account_is_prepared ()

gboolean            tp_account_is_prepared              (TpAccount *account,
                                                         GQuark feature);

Since 0.9.0

tp_account_prepare_async ()

void                tp_account_prepare_async            (TpAccount *account,
                                                         const GQuark *features,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Requests an asynchronous preparation of account with the features specified by features. When the operation is finished, callback will be called. You can then call tp_account_prepare_finish() to get the result of the operation.

If features is NULL, then callback will be called when the implied TP_ACCOUNT_FEATURE_CORE feature is ready.

If NULL is given to callback, then no callback will be called when the operation is finished. Instead, it will simply set features on manager. Note that if callback is NULL, then user_data must also be NULL.

Since 0.11.3, this is equivalent to calling the new function tp_proxy_prepare_async() with the same arguments.

Since 0.9.0

tp_account_prepare_finish ()

gboolean            tp_account_prepare_finish           (TpAccount *account,
                                                         GAsyncResult *result,
                                                         GError **error);

Finishes an async preparation of the account account.

Since 0.9.0

TP_ACCOUNT_FEATURE_ADDRESSING

#define             TP_ACCOUNT_FEATURE_ADDRESSING

Expands to a call to a function that returns a quark for the "addressing" feature on a TpAccount.

When this feature is prepared, the list of URI schemes from Account.Interface.Addressing has been retrieved and is available for use.

One can ask for a feature to be prepared using the tp_proxy_prepare_async() function, and waiting for it to callback.

Since 0.13.8

tp_account_get_uri_schemes ()

const gchar * const * tp_account_get_uri_schemes        (TpAccount *self);

Return the "uri-schemes" property

Since 0.13.8

tp_account_associated_with_uri_scheme ()

gboolean            tp_account_associated_with_uri_scheme
                                                        (TpAccount *self,
                                                         const gchar *scheme);

Since 0.13.8

tp_account_set_uri_scheme_association_async ()

void                tp_account_set_uri_scheme_association_async
                                                        (TpAccount *self,
                                                         const gchar *scheme,
                                                         gboolean associate,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Add scheme to the list of additional URI schemes that would be returned by tp_account_get_uri_schemes(), or remove it from that list.

scheme should not be the primary URI scheme for the account's protocol (for instance, "xmpp" for XMPP, or "sip" or "sips" for SIP), since the account should be assumed to be useful for those schemes regardless of the contents of the list.

Calling this method does not require the TP_ACCOUNT_FEATURE_ADDRESSING feature to be enabled, but the change will not be reflected in the result of tp_account_get_uri_schemes() or tp_account_associated_with_uri_scheme() unless that feature has been enabled.

Since 0.13.8

tp_account_set_uri_scheme_association_finish ()

gboolean            tp_account_set_uri_scheme_association_finish
                                                        (TpAccount *self,
                                                         GAsyncResult *result,
                                                         GError **error);

Interpret the result of tp_account_set_uri_scheme_association_async().

Since 0.13.8

TP_ACCOUNT_FEATURE_STORAGE

#define             TP_ACCOUNT_FEATURE_STORAGE

Expands to a call to a function that returns a quark for the "storage" feature on a TpAccount.

When this feature is prepared, the Account.Interface.Storage properties have been retrieved and are available for use.

One can ask for a feature to be prepared using the tp_proxy_prepare_async() function, and waiting for it to callback.

Since 0.13.2

tp_account_get_storage_provider ()

const gchar *       tp_account_get_storage_provider     (TpAccount *self);

Since 0.13.2

tp_account_get_storage_identifier ()

const GValue *      tp_account_get_storage_identifier   (TpAccount *self);

Since 0.13.2

tp_account_dup_storage_identifier_variant ()

GVariant *          tp_account_dup_storage_identifier_variant
                                                        (TpAccount *self);

Return provider-specific information used to identify this account. Use g_variant_get_type() to check that the type is what you expect; for instance, if the "storage-provider" has string-based user identifiers, this variant should have type G_VARIANT_TYPE_STRING.

Since 0.13.2

tp_account_get_storage_restrictions ()

TpStorageRestrictionFlags tp_account_get_storage_restrictions
                                                        (TpAccount *self);

Since 0.13.2

tp_account_get_storage_specific_information_async ()

void                tp_account_get_storage_specific_information_async
                                                        (TpAccount *self,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Makes an asynchronous request of self's StorageSpecificInformation property (part of the Account.Interface.Storage interface).

When the operation is finished, callback will be called. You must then call tp_account_get_storage_specific_information_finish() to get the result of the request.

Since 0.13.2

tp_account_get_storage_specific_information_finish ()

GHashTable *        tp_account_get_storage_specific_information_finish
                                                        (TpAccount *self,
                                                         GAsyncResult *result,
                                                         GError **error);

Retrieve the value of the request begun with tp_account_get_storage_specific_information_async().

Beware that the returned value is only valid until result is freed. Copy it with g_hash_table_ref() if you need to keep it for longer.

Since 0.13.2

tp_account_dup_storage_specific_information_vardict_async ()

void                tp_account_dup_storage_specific_information_vardict_async
                                                        (TpAccount *self,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Makes an asynchronous request of self's StorageSpecificInformation property (part of the Account.Interface.Storage interface).

When the operation is finished, callback will be called. You must then call tp_account_dup_storage_specific_information_vardict_finish() to get the result of the request.

Since 0.17.6

tp_account_dup_storage_specific_information_vardict_finish ()

GVariant *          tp_account_dup_storage_specific_information_vardict_finish
                                                        (TpAccount *self,
                                                         GAsyncResult *result,
                                                         GError **error);

Retrieve the value of the request begun with tp_account_dup_storage_specific_information_vardict_async().

Since 0.17.6

tp_cli_account_callback_for_reconnect ()

void                (*tp_cli_account_callback_for_reconnect)
                                                        (TpAccount *proxy,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a Reconnect method call succeeds or fails.

tp_cli_account_call_reconnect ()

TpProxyPendingCall * tp_cli_account_call_reconnect      (TpAccount *proxy,
                                                         gint timeout_ms,
                                                         tp_cli_account_callback_for_reconnect callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a Reconnect method call.

<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Re-connect this account. If the account is currently disconnected and the requested presence is offline, or if the account is not <tp:member-ref>Enabled</tp:member-ref> or not <tp:member-ref>Valid</tp:member-ref>, this does nothing.</p> <p>If the account is disconnected and the requested presence is not offline, this forces an attempt to connect with the requested presence immediately.</p> <p>If the account is connecting or connected, this is equivalent to remembering the current value of <tp:member-ref>RequestedPresence</tp:member-ref>, setting its value to (OFFLINE, &quot;offline&quot;, &quot;&quot;), waiting for the change to take effect, then setting its value to the value that was previously remembered.</p> <tp:rationale> <p>Clients desiring &quot;instant apply&quot; semantics for CM parameters MAY call this method to achieve that.</p> </tp:rationale> <p>In particular, if the account's <tp:member-ref>Connection</tp:member-ref> is in the Connecting state, calling this method causes the attempt to connect to be aborted and re-tried.</p> <tp:rationale> <p>This is necessary to ensure that the new parameters are picked up.</p> </tp:rationale>

tp_cli_account_callback_for_remove ()

void                (*tp_cli_account_callback_for_remove)
                                                        (TpAccount *proxy,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a Remove method call succeeds or fails.

tp_cli_account_call_remove ()

TpProxyPendingCall * tp_cli_account_call_remove         (TpAccount *proxy,
                                                         gint timeout_ms,
                                                         tp_cli_account_callback_for_remove callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a Remove method call.

Delete the account.

tp_cli_account_callback_for_update_parameters ()

void                (*tp_cli_account_callback_for_update_parameters)
                                                        (TpAccount *proxy,
                                                         const gchar **out_Reconnect_Required,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a UpdateParameters method call succeeds or fails.

tp_cli_account_call_update_parameters ()

TpProxyPendingCall * tp_cli_account_call_update_parameters
                                                        (TpAccount *proxy,
                                                         gint timeout_ms,
                                                         GHashTable *in_Set,
                                                         const gchar **in_Unset,
                                                         tp_cli_account_callback_for_update_parameters callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a UpdateParameters method call.

<tp:docstring xmlns="http://www.w3.org/1999/xhtml"> <p>Change the value of the <tp:member-ref>Parameters</tp:member-ref> property.</p> <p>If any of the <var>Set</var> parameters’ <tp:type>Conn_Mgr_Param_Flags</tp:type> include <code>DBus_Property</code>, the change will be applied immediately to the corresponding D-Bus Property on the active <tp:member-ref>Connection</tp:member-ref>, if there is one. If any of the <var>Unset</var> parameters’ <tp:type>Conn_Mgr_Param_Flags</tp:type> include both <code>DBus_Property</code> and <code>Has_Default</code>, the corresponding D-Bus Property on the connection will be set to the default value. Changes to other parameters will not take effect until the next time the account is disconnected and reconnected. (If parameters are explicitly set to their default value, or are unset when previously set to their default value, the account manager MAY decide that no reconnection is necessary to make the change take effect.)</p> <tp:rationale> <p>In general, reconnecting is a destructive operation that shouldn't happen as a side-effect. In particular, migration tools that twiddle the settings of all accounts shouldn't cause an automatic disconnect and reconnect.</p> </tp:rationale>

tp_cli_account_signal_callback_account_property_changed ()

void                (*tp_cli_account_signal_callback_account_property_changed)
                                                        (TpAccount *proxy,
                                                         GHashTable *arg_Properties,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Represents the signature of a callback for the signal AccountPropertyChanged.

tp_cli_account_connect_to_account_property_changed ()

TpProxySignalConnection * tp_cli_account_connect_to_account_property_changed
                                                        (TpAccount *proxy,
                                                         tp_cli_account_signal_callback_account_property_changed callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object,
                                                         GError **error);

Connect a handler to the signal AccountPropertyChanged.

The values of one or more properties on this interface (that do not specify that this signal does not apply to them) may have changed. This does not cover properties of other interfaces, which must provide their own change notification if appropriate.

tp_cli_account_signal_callback_removed ()

void                (*tp_cli_account_signal_callback_removed)
                                                        (TpAccount *proxy,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Represents the signature of a callback for the signal Removed.

tp_cli_account_connect_to_removed ()

TpProxySignalConnection * tp_cli_account_connect_to_removed
                                                        (TpAccount *proxy,
                                                         tp_cli_account_signal_callback_removed callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object,
                                                         GError **error);

Connect a handler to the signal Removed.

This account has been removed. <tp:rationale> This is redundant with <tp:dbus-ref namespace="org.freedesktop.Telepathy.AccountManager">AccountRemoved</tp:dbus-ref>, but it's still worth having, to avoid having to bind to AccountManager.AccountRemoved to tell you whether your Account is valid — ideally, an account-editing UI should only care about a single Account. </tp:rationale>

tp_cli_account_interface_avatar_signal_callback_avatar_changed ()

void                (*tp_cli_account_interface_avatar_signal_callback_avatar_changed)
                                                        (TpAccount *proxy,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Represents the signature of a callback for the signal AvatarChanged.

tp_cli_account_interface_avatar_connect_to_avatar_changed ()

TpProxySignalConnection * tp_cli_account_interface_avatar_connect_to_avatar_changed
                                                        (TpAccount *proxy,
                                                         tp_cli_account_interface_avatar_signal_callback_avatar_changed callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object,
                                                         GError **error);

Connect a handler to the signal AvatarChanged.

Emitted when the Avatar property changes. <tp:rationale>The avatar itself is deliberately not included in this signal, to reduce bus traffic in the (likely common) case where no running application cares about the user's own avatar.</tp:rationale>

tp_cli_account_interface_addressing_callback_for_set_uri_scheme_association ()

void                (*tp_cli_account_interface_addressing_callback_for_set_uri_scheme_association)
                                                        (TpAccount *proxy,
                                                         const GError *error,
                                                         gpointer user_data,
                                                         GObject *weak_object);

Signature of the callback called when a SetURISchemeAssociation method call succeeds or fails.

tp_cli_account_interface_addressing_call_set_uri_scheme_association ()

TpProxyPendingCall * tp_cli_account_interface_addressing_call_set_uri_scheme_association
                                                        (TpAccount *proxy,
                                                         gint timeout_ms,
                                                         const gchar *in_URI_Scheme,
                                                         gboolean in_Association,
                                                         tp_cli_account_interface_addressing_callback_for_set_uri_scheme_association callback,
                                                         gpointer user_data,
                                                         GDestroyNotify destroy,
                                                         GObject *weak_object);

Start a SetURISchemeAssociation method call.

<p>Associate (or disassociate) an account with a particular URI addressing scheme, (such as 'tel' for telephony)</p>

The "automatic-presence-type" property

  "automatic-presence-type"  guint                 : Read

The account's automatic presence type (a TpConnectionPresenceType).

When the account is put online automatically, for instance to make a channel request or because network connectivity becomes available, the automatic presence type, status and message will be copied to their "requested" counterparts.

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail. Change notifications for automatic-presence-type, automatic-status and automatic-status-message are always emitted together, so it is sufficient to connect to one of the notification signals.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is TP_CONNECTION_PRESENCE_TYPE_UNSET.

Allowed values: <= 9

Default value: 0

Since 0.13.8

The "automatic-status" property

  "automatic-status"         gchar*                : Read

The string status name to use in conjunction with the "automatic-presence-type".

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail. Change notifications for automatic-presence-type, automatic-status and automatic-status-message are always emitted together, so it is sufficient to connect to one of the notification signals.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Default value: NULL

Since 0.13.8

The "automatic-status-message" property

  "automatic-status-message" gchar*                : Read

The user-defined message to use in conjunction with the "automatic-presence-type".

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail. Change notifications for automatic-presence-type, automatic-status and automatic-status-message are always emitted together, so it is sufficient to connect to one of the notification signals.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Default value: NULL

Since 0.13.8

The "changing-presence" property

  "changing-presence"        gboolean              : Read

TRUE if an attempt is currently being made to change the account's presence ("current-presence-type", "current-status" and "current-status-message") to match its requested presence ("requested-presence-type", "requested-status" and "requested-status-message").

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is FALSE.

Default value: FALSE

Since 0.11.6

The "cm-name" property

  "cm-name"                  gchar*                : Read

The account's connection manager name.

Default value: NULL

Since 0.19.3

The "connect-automatically" property

  "connect-automatically"    gboolean              : Read

Whether the account should connect automatically or not. To change this property, use tp_account_set_connect_automatically_async().

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is FALSE.

Default value: FALSE

Since 0.9.0

The "connection" property

  "connection"               TpConnection*         : Read

The connection of the account, or NULL if account is offline. Note that the returned TpConnection is not guaranteed to have any features pre-prepared (not even TP_CONNECTION_FEATURE_CORE) unless TP_ACCOUNT_FEATURE_CONNECTION has been prepared on the account

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail. If TP_ACCOUNT_FEATURE_CONNECTION has been prepared, this signal will be delayed until the connection is ready.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Since 0.9.0

The "connection-error" property

  "connection-error"         gchar*                : Read

The D-Bus error name for the last disconnection or connection failure, (in particular, TP_ERROR_STR_CANCELLED if it was disconnected by user request), or NULL if the account is connected.

One can receive change notifications on this property by connecting to the "status-changed" signal, or by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Default value: NULL

Since 0.11.7

The "connection-error-details" property

  "connection-error-details" GHashTable*           : Read

A map from string to GValue containing extensible error details related to "connection-error". Functions like tp_asv_get_string() can be used to read from this map.

The keys for this map are defined by the Telepathy D-Bus Interface Specification. They will typically include debug-message, which is a debugging message in the C locale, analogous to GError.message.

One can receive change notifications on this property by connecting to the "status-changed" signal, or by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is an empty map.

Since 0.11.7

The "connection-manager" property

  "connection-manager"       gchar*                : Read

The account's connection manager name.

Default value: NULL

Since 0.9.0

The "connection-status" property

  "connection-status"        guint                 : Read

The account's connection status type (a TpConnectionStatus).

One can receive change notifications on this property by connecting to the "status-changed" signal, or by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is TP_CONNECTION_STATUS_DISCONNECTED.

Allowed values: <= 3

Default value: 2

Since 0.9.0

The "connection-status-reason" property

  "connection-status-reason" guint                 : Read

The account's connection status reason (a TpConnectionStatusReason).

One can receive change notifications on this property by connecting to the "status-changed" signal, or by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is TP_CONNECTION_STATUS_REASON_NONE_SPECIFIED.

Allowed values: <= 17

Default value: 0

Since 0.9.0

The "current-presence-type" property

  "current-presence-type"    guint                 : Read

The account connection's current presence type (a TpConnectionPresenceType).

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail. Change notifications for current-presence-type, current-status and current-status-message are always emitted together, so it is sufficient to connect to one of the notification signals.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is TP_CONNECTION_PRESENCE_TYPE_UNSET.

Allowed values: <= 9

Default value: 0

Since 0.9.0

The "current-status" property

  "current-status"           gchar*                : Read

The current Status string of the account.

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail. Change notifications for current-presence-type, current-status and current-status-message are always emitted together, so it is sufficient to connect to one of the notification signals.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Default value: NULL

Since 0.9.0

The "current-status-message" property

  "current-status-message"   gchar*                : Read

The current status message message of the account.

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail. Change notifications for current-presence-type, current-status and current-status-message are always emitted together, so it is sufficient to connect to one of the notification signals.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Default value: NULL

Since 0.9.0

The "display-name" property

  "display-name"             gchar*                : Read

The account's display name, from the DisplayName property.

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Default value: NULL

Since 0.9.0

The "enabled" property

  "enabled"                  gboolean              : Read

Whether this account is enabled or not.

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is FALSE.

Default value: FALSE

Since 0.9.0

The "has-been-online" property

  "has-been-online"          gboolean              : Read

Whether this account has been online or not.

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is FALSE.

Default value: FALSE

Since 0.9.0

The "icon-name" property

  "icon-name"                gchar*                : Read

The account's icon name. To change this propery, use tp_account_set_icon_name_async().

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Default value: NULL

Since 0.9.0

The "nickname" property

  "nickname"                 gchar*                : Read

The nickname that should be set for the user on this account.

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Default value: NULL

Since 0.9.0

The "normalized-name" property

  "normalized-name"          gchar*                : Read

The normalized form of the user's own unique identifier on this protocol. For example, on XMPP accounts this is the user's JID; on ICQ this is the user's UIN; and so on.

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Default value: NULL

Since 0.13.8

The "protocol" property

  "protocol"                 gchar*                : Read

The account's machine-readable protocol name, such as "jabber", "msn" or "local-xmpp". Recommended names for most protocols can be found in the Telepathy D-Bus Interface Specification.

Default value: NULL

Since 0.9.0

The "protocol-name" property

  "protocol-name"            gchar*                : Read

The account's machine-readable protocol name, such as "jabber", "msn" or "local-xmpp". Recommended names for most protocols can be found in the Telepathy D-Bus Interface Specification.

Default value: NULL

Since 0.19.3

The "requested-presence-type" property

  "requested-presence-type"  guint                 : Read

The account's requested presence type (a TpConnectionPresenceType).

Since 0.13.8, one can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail. Change notifications for requested-presence-type, requested-status and requested-status-message are always emitted together, so it is sufficient to connect to one of the notification signals.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Allowed values: <= 9

Default value: 0

Since 0.9.0

The "requested-status" property

  "requested-status"         gchar*                : Read

The requested Status string of the account.

Since 0.13.8, one can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail. Change notifications for requested-presence-type, requested-status and requested-status-message are always emitted together, so it is sufficient to connect to one of the notification signals.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Default value: NULL

Since 0.9.0

The "requested-status-message" property

  "requested-status-message" gchar*                : Read

The requested status message message of the account.

Since 0.13.8, one can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail. Change notifications for requested-presence-type, requested-status and requested-status-message are always emitted together, so it is sufficient to connect to one of the notification signals.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is NULL.

Default value: NULL

Since 0.9.0

The "service" property

  "service"                  gchar*                : Read

A machine-readable name identifying a specific service to which this account connects, or a copy of "protocol" if there is no more specific service.

Well-known names for various services can be found in the Telepathy D-Bus Interface Specification.

For instance, accounts for the "jabber" protocol should have the service names "google-talk", "ovi-chat", "facebook" and "lj-talk" for accounts that connect to Google Talk, Ovi Chat, Facebook and Livejournal, respectively, and this property will be "jabber" for accounts that connect to a generic Jabber server.

To change this property, use tp_account_set_service_async().

Default value: NULL

Since 0.11.9

The "storage-identifier" property

  "storage-identifier"       GValue*               : Read

The storage identifier for this account.

A provider-specific variant type used to identify this account with the provider. This value will be NULL if "storage-provider" is an empty string.

This property cannot change once an Account has been created.

This is not guaranteed to have been retrieved until the TP_ACCOUNT_FEATURE_STORAGE feature has been prepared; until then, the value is NULL.

Since 0.13.2

The "storage-identifier-variant" property

  "storage-identifier-variant" GVariant*             : Read

Provider-specific information used to identify this account. Use g_variant_get_type() to check that the type is what you expect. For instance, if you use a "storage-provider" with numeric identifiers for accounts, this variant might have type G_VARIANT_TYPE_UINT32; if the storage provider has string-based identifiers, it should have type G_VARIANT_TYPE_STRING.

This property cannot change once an Account has been created.

This is not guaranteed to have been retrieved until the TP_ACCOUNT_FEATURE_STORAGE feature has been prepared; until then, the value is NULL.

Allowed values: GVariant<*>

Default value: NULL

Since 0.13.2

The "storage-provider" property

  "storage-provider"         gchar*                : Read

The storage provider for this account.

The name of the account storage implementation. When this is the empty string the account is internally stored.

This property cannot change once an Account has been created.

This is not guaranteed to have been retrieved until the TP_ACCOUNT_FEATURE_STORAGE feature has been prepared; until then, the value is NULL.

Default value: NULL

Since 0.13.2

The "storage-restrictions" property

  "storage-restrictions"     guint                 : Read

The storage restrictions for this account.

A bitfield of TpStorageRestrictionFlags that give the limitations of this account imposed by the storage provider. This value will be 0 if "storage-provider" is an empty string.

This property cannot change once an Account has been created.

This is not guaranteed to have been retrieved until the TP_ACCOUNT_FEATURE_STORAGE feature has been prepared; until then, the value is 0.

Default value: 0

Since 0.13.2

The "supersedes" property

  "supersedes"               GStrv                 : Read

The object paths of previously-active accounts superseded by this one. For instance, this can be used in a logger to read old logs for an account that has been migrated from one connection manager to another.

This is not guaranteed to have been retrieved until the TP_ACCOUNT_FEATURE_CORE feature has been prepared; until then, the value is NULL.

Since 0.17.5

The "uri-schemes" property

  "uri-schemes"              GStrv                 : Read

If the TP_ACCOUNT_FEATURE_ADDRESSING feature has been prepared successfully, a list of additional URI schemes for which this account should be used if possible. Otherwise NULL.

For instance, a SIP or Skype account might have "tel" in this list if the user would like to use that account to call phone numbers.

This list should not contain the primary URI scheme(s) for the account's protocol (for instance, "xmpp" for XMPP, or "sip" or "sips" for SIP), since it should be assumed to be useful for those schemes in any case.

The notify::uri-schemes signal cannot be relied on if the Account Manager is Mission Control version 5.14.0 or older.

Since 0.21.0

The "valid" property

  "valid"                    gboolean              : Read

Whether this account is valid.

One can receive change notifications on this property by connecting to the "notify" signal and using this property as the signal detail.

This is not guaranteed to have been retrieved until tp_proxy_prepare_async() has finished; until then, the value is FALSE.

Default value: FALSE

Since 0.9.0

The "avatar-changed" signal

void                user_function                      (TpAccount *self,
                                                        gpointer   user_data)      : Run Last

Emitted when the avatar changes. Call tp_account_get_avatar_async() to get the new avatar data.

Since 0.23.0

The "presence-changed" signal

void                user_function                      (TpAccount *account,
                                                        guint      presence,
                                                        gchar     *status,
                                                        gchar     *status_message,
                                                        gpointer   user_data)           : Run Last

Emitted when the presence of the account changes.

Since 0.9.0

The "status-changed" signal

void                user_function                      (TpAccount  *account,
                                                        guint       old_status,
                                                        guint       new_status,
                                                        guint       reason,
                                                        gchar      *dbus_error_name,
                                                        GHashTable *details,
                                                        gpointer    user_data)            : Run Last

Emitted when the connection status on the account changes.

The dbus_error_name and details parameters were present, but non-functional (always NULL), in older versions. They have been available with their current behaviour since version 0.11.7.

Since 0.9.0