#include <TelepathyQt/_gen/svc-channel.h>

Inherits Tp::AbstractAdaptor.

Public Slots
void	Offer (uint addresstype, const QDBusVariant &address, uint accesscontrol, const QVariantMap &parameters, const QDBusMessage &dbusMessage)

QDBusVariant	Accept (uint addresstype, uint accesscontrol, const QDBusVariant &accesscontrolparam, const QDBusMessage &dbusMessage)

Signals
void	NewRemoteConnection (uint handle, const QDBusVariant &connectionParam, uint connectionID)

void	NewLocalConnection (uint connectionID)

void	ConnectionClosed (uint connectionID, const QString &error, const QString &message)

Public Member Functions
QString	Service () const

Tp::SupportedSocketMap	SupportedSocketTypes () const

Public Member Functions inherited from Tp::AbstractAdaptor
	AbstractAdaptor (const QDBusConnection &connection, QObject adaptee, QObject parent)

	~AbstractAdaptor ()

QDBusConnection	dbusConnection () const

QObject *	adaptee () const

Detailed Description

Adaptor class providing a 1:1 mapping of the D-Bus interface "org.freedesktop.Telepathy.Channel.Type.StreamTube".

Member Function Documentation

QString Tp::Service::ChannelTypeStreamTubeAdaptor::Service ( ) const

Return the value of the exported D-Bus object property Service of type QString.

Adaptees should export this property as a Qt property named 'service' with type QString.

A string representing the service name that will be used over the tube. It should be a well-known TCP service name as defined by http://www.iana.org/assignments/port-numbers or http://www.dns-sd.org/ServiceTypes.html, for instance "rsync" or "daap".

When the tube is offered, the service name is transmitted to the other end.

When requesting a channel with ConnectionInterfaceRequestsInterface::CreateChannel() , this property MUST be included in the request.

Returns: The value of exported property Service.

Tp::SupportedSocketMap Tp::Service::ChannelTypeStreamTubeAdaptor::SupportedSocketTypes ( ) const

Return the value of the exported D-Bus object property SupportedSocketTypes of type Tp::SupportedSocketMap.

Adaptees should export this property as a Qt property named 'supportedSocketTypes' with type Tp::SupportedSocketMap.

A mapping from address types (members of Socket_Address_Type) to arrays of access-control type (members of Socket_Access_Control) that the connection manager supports for stream tubes with that address type. For simplicity, if a CM supports offering a particular type of tube, it is assumed to support accepting it.

A typical value for a host without IPv6 support:

  {
    Socket_Address_Type_IPv4:
      [Socket_Access_Control_Localhost, Socket_Access_Control_Port,
       Socket_Access_Control_Netmask],
    Socket_Address_Type_Unix:
      [Socket_Access_Control_Localhost, Socket_Access_Control_Credentials]
  }

Connection Managers MUST support at least IPv4 with the localhost access control.

When requesting a channel with ConnectionInterfaceRequestsInterface::CreateChannel() , this property MUST NOT be included in the request.

Returns: The value of exported property SupportedSocketTypes.

void Tp::Service::ChannelTypeStreamTubeAdaptor::Offer	(	uint	addresstype,
		const QDBusVariant &	address,
		uint	accesscontrol,
		const QVariantMap &	parameters,
		const QDBusMessage &	dbusMessage
	)

slot

Begins a call to the exported D-Bus method Offer on this object.

Adaptees should export this method as a Qt slot with the following signature: void offer(uint addresstype, const QDBusVariant& address, uint accesscontrol, const QVariantMap& parameters, const Tp::Service::ChannelTypeStreamTubeAdaptor::OfferContextPtr &context);

Implementations should call MethodInvocationContext::setFinished (or setFinishedWithError accordingly) on the received context object once the method has finished processing.

Offer a stream tube exporting the local socket specified.

Parameters

addresstype	The type of the listening address of the local service, as a member of Socket_Address_Type.
address	The listening address of the local service, as indicated by the address_type.
accesscontrol	The access control the local service applies to the local socket, specified so the connection manager can behave appropriately when it connects.
parameters	The dictionary of arbitrary Parameters to send with the tube offer.

QDBusVariant Tp::Service::ChannelTypeStreamTubeAdaptor::Accept	(	uint	addresstype,
		uint	accesscontrol,
		const QDBusVariant &	accesscontrolparam,
		const QDBusMessage &	dbusMessage
	)

slot

Begins a call to the exported D-Bus method Accept on this object.

Adaptees should export this method as a Qt slot with the following signature: void accept(uint addresstype, uint accesscontrol, const QDBusVariant& accesscontrolparam, const Tp::Service::ChannelTypeStreamTubeAdaptor::AcceptContextPtr &context);

Implementations should call MethodInvocationContext::setFinished (or setFinishedWithError accordingly) on the received context object once the method has finished processing.

Accept a stream tube that's in the "local pending" state. The connection manager will attempt to open the tube. The tube remains in the "local pending" state until the TubeChannelStateChanged signal is emitted.

Parameters

addresstype

The type of address the connection manager should listen on.

accesscontrol

The type of access control the connection manager should apply to the socket.

Note that if you plan to establish more than one connection through the tube, the Socket_Access_Control_Port access control can't be used as you can't connect more than once from the same port.

accesscontrolparam

A parameter for the access control type, to be interpreted as 
specified in the documentation for the Socket_Access_Control enum.

Returns

The address on which the connection manager will listen for 
connections to this tube. The client should not attempt to connect 
to the address until the tube is open.

void Tp::Service::ChannelTypeStreamTubeAdaptor::NewRemoteConnection	(	uint	handle,
		const QDBusVariant &	connectionParam,
		uint	connectionID
	)

signal

Represents the exported D-Bus signal NewRemoteConnection on this object.

Adaptees should export this signal as a Qt signal with the following signature: void newRemoteConnection(uint handle, const QDBusVariant& connectionParam, uint connectionID);

The adaptee signal will be automatically relayed as a D-Bus signal once emitted.

Parameters

handle

The handle of the participant who opened the new connection

connectionParam

A parameter which can be used by the listening process to identify the connection. Note that this parameter has a meaningful value only in the Socket_Access_Control_Port and Socket_Access_Control_Credentials cases. If a different Socket_Access_Control has been chosen when offering the tube, this parameter should be ignored.

In the Socket_Access_Control_Port case, the variant contains a struct Socket_Address_IPv4 (or Socket_Address_IPv6) containing the address from which the CM is connected to the client application.

In the Socket_Access_Control_Credentials case, the variant contains the byte (D-Bus signature 'y') that has been sent with the credentials.

connectionID

The unique ID associated with this connection. This ID will be used 
to identifiy the connection when reporting errors with 
ConnectionClosed.

void Tp::Service::ChannelTypeStreamTubeAdaptor::NewLocalConnection ( uint connectionID )

signal

Represents the exported D-Bus signal NewLocalConnection on this object.

Adaptees should export this signal as a Qt signal with the following signature: void newLocalConnection(uint connectionID);

The adaptee signal will be automatically relayed as a D-Bus signal once emitted.

Parameters

connectionID

The unique ID associated with this connection. This ID will be used 
to identifiy the connection when reporting errors with 
ConnectionClosed.

void Tp::Service::ChannelTypeStreamTubeAdaptor::ConnectionClosed	(	uint	connectionID,
		const QString &	error,
		const QString &	message
	)

signal

Represents the exported D-Bus signal ConnectionClosed on this object.

Adaptees should export this signal as a Qt signal with the following signature: void connectionClosed(uint connectionID, const QString& error, const QString& message);

The adaptee signal will be automatically relayed as a D-Bus signal once emitted.

Parameters

connectionID

The ID of the connection.

error

The name of a D-Bus error describing the error that occurred.

The following errors can be used:

org.freedesktop.Telepathy.Error.Cancelled: user closed the socket or the tube.
org.freedesktop.Telepathy.Error.ConnectionLost: the bytestream relaying connection's data has been broken.
org.freedesktop.Telepathy.Error.ConnectionRefused: the tube offer refused the connection.

message

A debug message.

Public Slots

Signals

Public Member Functions

Detailed Description

Member Function Documentation