Home · All Classes · All Namespaces · Modules · Functions · Files |
#include <TelepathyQt/_gen/svc-connection.h>
Inherits Tp::AbstractAdaptor.
Signals | |
void | IMSIChanged (const QString &IMSI) |
Public Member Functions | |
uint | MessageValidityPeriod () const |
void | SetMessageValidityPeriod (const uint &newValue) |
bool | OverrideMessageServiceCentre () const |
void | SetOverrideMessageServiceCentre (const bool &newValue) |
QString | MessageServiceCentre () const |
void | SetMessageServiceCentre (const QString &newValue) |
QString | IMSI () const |
bool | MessageReducedCharacterSet () const |
void | SetMessageReducedCharacterSet (const bool &newValue) |
QString | MessageNationalCharacterSet () const |
void | SetMessageNationalCharacterSet (const QString &newValue) |
Public Member Functions inherited from Tp::AbstractAdaptor | |
AbstractAdaptor (const QDBusConnection &connection, QObject *adaptee, QObject *parent) | |
~AbstractAdaptor () | |
QDBusConnection | dbusConnection () const |
QObject * | adaptee () const |
Adaptor class providing a 1:1 mapping of the D-Bus interface "org.freedesktop.Telepathy.Connection.Interface.Cellular".
uint Tp::Service::ConnectionInterfaceCellularAdaptor::MessageValidityPeriod | ( | ) | const |
Return the value of the exported D-Bus object property MessageValidityPeriod
of type uint
.
Adaptees should export this property as a Qt property named 'messageValidityPeriod' with type uint.
Define how long should the service centre try message delivery before giving up, failing delivery and deleting the message. A value of 0 means to use the service centre's default period.
The value specified is in seconds. Note that various protocols or implementations may round the value up (eg. to a minute or hour precision). The maximum validity period may vary depending on protocol or provider.
MessageValidityPeriod
. void Tp::Service::ConnectionInterfaceCellularAdaptor::SetMessageValidityPeriod | ( | const uint & | newValue | ) |
Set the value of the exported D-Bus object property MessageValidityPeriod
of type uint
.
Adaptees should export this property as a writable Qt property named 'messageValidityPeriod' with type uint.
Define how long should the service centre try message delivery before giving up, failing delivery and deleting the message. A value of 0 means to use the service centre's default period.
The value specified is in seconds. Note that various protocols or implementations may round the value up (eg. to a minute or hour precision). The maximum validity period may vary depending on protocol or provider.
bool Tp::Service::ConnectionInterfaceCellularAdaptor::OverrideMessageServiceCentre | ( | ) | const |
Return the value of the exported D-Bus object property OverrideMessageServiceCentre
of type bool
.
Adaptees should export this property as a Qt property named 'overrideMessageServiceCentre' with type bool.
If True
, SMSes will be sent via the service centre
specified by MessageServiceCentre . If
False
, the SIM's default SMSC will be used, ignoring the
value of MessageServiceCentre.
It could be desirable for a configuration interface to remember the user's previous choice of custom SMSC, even if it's not in use. This boolean allows that choice to be saved as an account parameter by Mission Control, rather than the UI needing to save it elsewhere to be restored if the user wants to reactivate it.
OverrideMessageServiceCentre
. void Tp::Service::ConnectionInterfaceCellularAdaptor::SetOverrideMessageServiceCentre | ( | const bool & | newValue | ) |
Set the value of the exported D-Bus object property OverrideMessageServiceCentre
of type bool
.
Adaptees should export this property as a writable Qt property named 'overrideMessageServiceCentre' with type bool.
If True
, SMSes will be sent via the service centre
specified by MessageServiceCentre . If
False
, the SIM's default SMSC will be used, ignoring the
value of MessageServiceCentre.
It could be desirable for a configuration interface to remember the user's previous choice of custom SMSC, even if it's not in use. This boolean allows that choice to be saved as an account parameter by Mission Control, rather than the UI needing to save it elsewhere to be restored if the user wants to reactivate it.
QString Tp::Service::ConnectionInterfaceCellularAdaptor::MessageServiceCentre | ( | ) | const |
Return the value of the exported D-Bus object property MessageServiceCentre
of type QString
.
Adaptees should export this property as a Qt property named 'messageServiceCentre' with type QString.
Address for the messaging service centre. Typically (as is the case
for GSM's SMSC), it's the ISDN / telephony address (ie. a phone
number). If
OverrideMessageServiceCentre is
False
, this property's value should be ignored by the CM
in favour of the SIM's default SMSC.
MessageServiceCentre
. void Tp::Service::ConnectionInterfaceCellularAdaptor::SetMessageServiceCentre | ( | const QString & | newValue | ) |
Set the value of the exported D-Bus object property MessageServiceCentre
of type QString
.
Adaptees should export this property as a writable Qt property named 'messageServiceCentre' with type QString.
Address for the messaging service centre. Typically (as is the case
for GSM's SMSC), it's the ISDN / telephony address (ie. a phone
number). If
OverrideMessageServiceCentre is
False
, this property's value should be ignored by the CM
in favour of the SIM's default SMSC.
QString Tp::Service::ConnectionInterfaceCellularAdaptor::IMSI | ( | ) | const |
Return the value of the exported D-Bus object property IMSI
of type QString
.
Adaptees should export this property as a Qt property named 'imsi' with type QString.
The International Mobile Subscriber Identifier, if it exists. This would originate from a SIM card. If the IMSI is unknown, this will contain an empty string ("").
IMSI
. bool Tp::Service::ConnectionInterfaceCellularAdaptor::MessageReducedCharacterSet | ( | ) | const |
Return the value of the exported D-Bus object property MessageReducedCharacterSet
of type bool
.
Adaptees should export this property as a Qt property named 'messageReducedCharacterSet' with type bool.
Determines how to encode SMSes containing characters that do not
fit into a non-Unicode character set.
If False
(which SHOULD be the default), messages will
be encoded as UCS-2 and sent with no loss of fidelity (at the
potential financial cost of using twice as many SMSes); if
True
, the message will be recoded in an
implementationāspecific way to fit into a GSM reduced character
set.
MessageReducedCharacterSet
. void Tp::Service::ConnectionInterfaceCellularAdaptor::SetMessageReducedCharacterSet | ( | const bool & | newValue | ) |
Set the value of the exported D-Bus object property MessageReducedCharacterSet
of type bool
.
Adaptees should export this property as a writable Qt property named 'messageReducedCharacterSet' with type bool.
Determines how to encode SMSes containing characters that do not
fit into a non-Unicode character set.
If False
(which SHOULD be the default), messages will
be encoded as UCS-2 and sent with no loss of fidelity (at the
potential financial cost of using twice as many SMSes); if
True
, the message will be recoded in an
implementationāspecific way to fit into a GSM reduced character
set.
QString Tp::Service::ConnectionInterfaceCellularAdaptor::MessageNationalCharacterSet | ( | ) | const |
Return the value of the exported D-Bus object property MessageNationalCharacterSet
of type QString
.
Adaptees should export this property as a Qt property named 'messageNationalCharacterSet' with type QString.
Hint for the connection manager for the GSM character set that
should be used to send SMSes. The connection manager SHOULD follow
this hint unless it has other ways to determine a better encoding.
If the value is "gsm"
(which SHOULD be the default),
SMSes will be encoded in the normal 7-bit GSM character set,
eventually falling back to UCS-2; see the
MessageReducedCharacterSet property
for details.
Other valid character sets are specified in the
GSM standard and are, for instance, "turkey"
,
"spain"
or "portugal"
.
If the SMS cannot be encoded using the requested character set the
behaviour is implementation-specific, but it is RECOMMENDED that
the connection manager should behave as if this property was set
to "gsm"
.
MessageNationalCharacterSet
. void Tp::Service::ConnectionInterfaceCellularAdaptor::SetMessageNationalCharacterSet | ( | const QString & | newValue | ) |
Set the value of the exported D-Bus object property MessageNationalCharacterSet
of type QString
.
Adaptees should export this property as a writable Qt property named 'messageNationalCharacterSet' with type QString.
Hint for the connection manager for the GSM character set that
should be used to send SMSes. The connection manager SHOULD follow
this hint unless it has other ways to determine a better encoding.
If the value is "gsm"
(which SHOULD be the default),
SMSes will be encoded in the normal 7-bit GSM character set,
eventually falling back to UCS-2; see the
MessageReducedCharacterSet property
for details.
Other valid character sets are specified in the
GSM standard and are, for instance, "turkey"
,
"spain"
or "portugal"
.
If the SMS cannot be encoded using the requested character set the
behaviour is implementation-specific, but it is RECOMMENDED that
the connection manager should behave as if this property was set
to "gsm"
.
|
signal |
Represents the exported D-Bus signal IMSIChanged
on this object.
Adaptees should export this signal as a Qt signal with the following signature: void imsiChanged(const QString& IMSI);
The adaptee signal will be automatically relayed as a D-Bus signal once emitted.
IMSI | The new IMSI value. This may be an empty string in the case where the IMSI is being reset or removed. |
Copyright © 2008-2011 Collabora Ltd. and Nokia Corporation | Telepathy-Qt 0.9.7 |