Interface Protocol.Interface.Addressing

Interface Index (Compact) | Summary | Description | Methods | Properties

Methods

NormalizeVCardAddress (s: VCard_Field, s: VCard_Address) s: Normalized_VCard_Address
NormalizeContactURI (s: URI) s: Normalized_URI

Properties

AddressableVCardFields as Read only
AddressableURISchemes as Read only
Added in 0.25.1. (as stable API). From the draft, NormalizeURI was renamed to NormalizeContactURI, clarifying that it removes any actions from the URI.
Objects implementing this interface must also implement:

Description

An interface for protocols that support multiple forms of addressing contacts, for example through vCard addresses and URIs.

If the ConnectionManager has a .manager file, and it supports this interface, the interface's immutable properties must be represented in the file; the representation is described as part of the documentation for each property.

For instance, a SIP connection manager might have the following lines in the .manager file.

[Protocol sip]
AddressableVCardFields=tel;x-sip;
AddressableURISchemes=tel;sip;

Methods

(Permalink)

NormalizeVCardAddress (s: VCard_Field, s: VCard_Address) → s: Normalized_VCard_Address

Parameters

  • VCard_Field — s
  • The vCard field of the address we are normalizing. The field name SHOULD be in lower case, and MUST appear in AddressableVCardFields.
  • VCard_Address — s
  • The address to normalize, which is assumed to belong to a contact (and not, for instance, a chatroom or server).

Returns

  • Normalized_VCard_Address — s
  • The vCard address, normalized as much as possible.

Attempt to normalize the given vCard address. Where possible, this SHOULD return an address that would appear in the org.freedesktop.Telepathy.Connection.Interface.Addressing1/addresses attribute for a contact on a connected Connection.

If full normalization requires network activity or is otherwise impossible to do without a Connection, this method SHOULD perform a best-effort normalization.

An example would be a vCard TEL field with a formatted number in the form of +1 (206) 555 1234, this would be normalized to +12065551234.

This method MAY simply raise NotImplemented on some protocols, if it has no use.


Possible Errors

(Permalink)

NormalizeContactURI (s: URI) → s: Normalized_URI

Added in 0.25.1. (renamed from NormalizeURI)

Parameters

  • URI — s
  • The URI to normalize, which is assumed to refer to a contact (as opposed to, for instance, a chatroom or a server).

    Rationale:

    In some protocols, like XMPP, there is no way to tell whether a given URI refers to a contact or a chatroom by looking at its syntax.

    The URI's scheme (i.e. the part before the first colon) MUST appear in AddressableURISchemes.

Returns

  • Normalized_URI — s
  • A URI, normalized as much as possible.

Attempt to normalize the given contact URI. Where possible, this SHOULD return an address that would appear in the org.freedesktop.Telepathy.Connection.Interface.Addressing1/uris attribute for a contact on a connected Connection.

If full normalization requires network activity or is otherwise impossible to do without a Connection, this method SHOULD perform a best-effort normalization.

If the URI has extra information beyond what's necessary to identify a particular contact, such as an XMPP resource or an action to carry out, this extra information SHOULD be removed. If all URIs in a scheme contain a verb or action (like aim, ymsgr and msnim URIs), then the verb SHOULD be replaced with the one specified in AddressableURISchemes.

Rationale:

This method is intended to normalize URIs stored in address books, for instance. In protocols like XMPP, if you vary the resource or action (query string), the URI still refers to the same high-level contact.

For instance, xmpp:romeo@Example.Com/Empathy?message;body=Hello would be normalized to xmpp:romeo@example.com, and aim:goim?screenname=Romeo%20M&message=Hello would be normalized to aim:addbuddy?screenname=romeom.

This method MAY simply raise NotImplemented on some protocols, if it has no use.


Possible Errors

  • Not Implemented
  • The URI scheme is not supported (it is not in AddressableURISchemes).
  • Invalid Argument
  • The URI is syntactically incorrect or cannot be interpreted as a reference to a contact.

    Rationale:

    For instance, aim:!? is not a valid AIM URI, while aim:goaway?message=Absent is a valid AIM URI, but not a contact.

Properties

Accessed using the org.freedesktop.DBus.Properties interface.
(Permalink)

AddressableVCardFields — as

Read only

The vCard fields that can be used to request a contact with normalized to lower case. If the URL vCard field is addressable, a colon, followed by the supported URI schemes will be concatenated.

For example: ["tel", "x-sip"].

The url vCard field MUST NOT appear here; see AddressableURISchemes instead.

Rationale:

In practice, protocols have a limited set of URI schemes that make sense to resolve as a contact.

Connection managers with a .manager file MUST cache this property in the protocol's section of the .manager file if it is non-empty, using the key AddressableVCardFields. The corresponding value is a list of strings, each followed with a semicolon and in the syntax of the "localestring" type from the Desktop Entry Specification.

Well-known vCard fields:

tel
The TEL vCard field. Used for phone numbers.
x-sip
The X-SIP vCard field. Used for SIP addresses.
x-aim
The X-AIM vCard field. Used for AIM user IDs.
x-icq
The X-ICQ vCard field. Used for ICQ UINs.
x-skype
The X-SKYPE vCard field. Used for Skype user names or telephone numbers. There is also a X-SKYPE-USERNAME field, but for Telepathy purposes, x-skype is preferred
x-groupwise
The X-GROUPWISE vCard field. Used for Groupwise contacts.
x-gadugadu
The X-GADUGADU vCard field. Used for Gadu-Gadu contacts.
x-jabber
The X-JABBER vCard field. Used for XMPP JIDs.
x-msn
The X-MSN vCard field. Used for MSN contacts.
x-yahoo
The X-YAHOO vCard field. Used for Yahoo! IDs.
x-facebook-id
Used for Facebook IDs in XMPP. If the user JID is "-12345@chat.facebook.com" then the x-facebook-id is "12345"
(Permalink)

AddressableURISchemes — as

Read only

The URI schemes that are supported by this protocol.

For example: ["tel", "sip"].

This property should only be used when the connection is offline. When it is connected the addressable URI schemes should be retrieved from the Requests.RequestableChannelClasses's TargetURIScheme fixed-property instead.

Connection managers with a .manager file MUST cache this property in the protocol's section of the .manager file if it is non-empty, using the key AddressableURISchemes. The corresponding value is a list of strings, each followed with a semicolon and in the syntax of the "localestring" type from the Desktop Entry Specification.

Well-known URI schemes:

sip
SIP protocol. For example: sip:julien@example.com.
sips
Secure (encrypted) SIP protocol. For example: sips:julien@example.com.
tel
Used for telephone numbers. For example: tel:+12065551234.
xmpp
XMPP protocol. For example: xmpp:julien@example.com.
msnim
For the purposes of Protocol.Interface.Addressing, Connection.Interface.Addressing1, and Channel.Interface.Addressing1, the verb part is ignored, and SHOULD be add; the contact field in the query string is used to identify the contact. For example: msnim:add?contact=julien.
aim
For the purposes of Protocol.Interface.Addressing, Connection.Interface.Addressing1, and Channel.Interface.Addressing1, the verb part is ignored, and SHOULD be addbuddy; the screenname field in the query string is used to identify the contact. For example: aim:addbuddy?screenname=julien.
skype
Skype protocol. For example: skype:julien.
ymsgr
For the purposes of Protocol.Interface.Addressing, Connection.Interface.Addressing1, and Channel.Interface.Addressing1, the verb part is ignored, and SHOULD be addfriend; the query string is used to identify the contact. For example: ymsgr:addfriend?julien.
gg
Gadu-Gadu protocol. For example: gg:julien.