#include <TelepathyQt/Channel>

Inherits Tp::AbstractInterface.

Public Slots
QDBusPendingReply< Tp::MediaStreamInfoList >	ListStreams (int timeout=-1)

QDBusPendingReply	RemoveStreams (const Tp::UIntList &streams, int timeout=-1)

QDBusPendingReply	RequestStreamDirection (uint streamID, uint streamDirection, int timeout=-1)

QDBusPendingReply< Tp::MediaStreamInfoList >	RequestStreams (uint contactHandle, const Tp::UIntList &types, int timeout=-1)

Signals
void	StreamAdded (uint streamID, uint contactHandle, uint streamType)

void	StreamDirectionChanged (uint streamID, uint streamDirection, uint pendingFlags)

void	StreamError (uint streamID, uint errorCode, const QString &message)

void	StreamRemoved (uint streamID)

void	StreamStateChanged (uint streamID, uint streamState)

Signals inherited from Tp::AbstractInterface
void	propertiesChanged (const QVariantMap &changedProperties, const QStringList &invalidatedProperties)

Public Member Functions
	ChannelTypeStreamedMediaInterface (const QString &busName, const QString &objectPath, QObject *parent=0)

	ChannelTypeStreamedMediaInterface (const QDBusConnection &connection, const QString &busName, const QString &objectPath, QObject *parent=0)

	ChannelTypeStreamedMediaInterface (Tp::DBusProxy *proxy)

	ChannelTypeStreamedMediaInterface (const Tp::Client::ChannelInterface &mainInterface)

	ChannelTypeStreamedMediaInterface (const Tp::Client::ChannelInterface &mainInterface, QObject *parent)

Tp::PendingVariant *	requestPropertyInitialAudio () const

Tp::PendingVariant *	requestPropertyInitialVideo () const

Tp::PendingVariant *	requestPropertyImmutableStreams () const

Tp::PendingVariantMap *	requestAllProperties () const

Public Member Functions inherited from Tp::AbstractInterface
virtual	~AbstractInterface ()

bool	isValid () const

QString	invalidationReason () const

QString	invalidationMessage () const

void	setMonitorProperties (bool monitorProperties)

bool	isMonitoringProperties () const

Static Public Member Functions
static QLatin1String	staticInterfaceName ()

Protected Member Functions
virtual void	invalidate (Tp::DBusProxy *, const QString &, const QString &)

Protected Member Functions inherited from Tp::AbstractInterface
	AbstractInterface (DBusProxy *proxy, const QLatin1String &interface)

	AbstractInterface (const QString &busName, const QString &path, const QLatin1String &interface, const QDBusConnection &connection, QObject *parent)

PendingVariant *	internalRequestProperty (const QString &name) const

PendingOperation *	internalSetProperty (const QString &name, const QVariant &newValue)

PendingVariantMap *	internalRequestAllProperties () const

Additional Inherited Members
Protected Slots inherited from Tp::AbstractInterface

Detailed Description

Proxy class providing a 1:1 mapping of the D-Bus interface "org.freedesktop.Telepathy.Channel.Type.StreamedMedia".

Constructor & Destructor Documentation

◆ ChannelTypeStreamedMediaInterface() [1/5]

Tp::Client::ChannelTypeStreamedMediaInterface::ChannelTypeStreamedMediaInterface	(	const QString &	busName,
		const QString &	objectPath,
		QObject *	parent = `0`
	)

Creates a ChannelTypeStreamedMediaInterface associated with the given object on the session bus.

Parameters

busName	Name of the service the object is on.
objectPath	Path to the object on the service.
parent	Passed to the parent class constructor.

◆ ChannelTypeStreamedMediaInterface() [2/5]

Tp::Client::ChannelTypeStreamedMediaInterface::ChannelTypeStreamedMediaInterface	(	const QDBusConnection &	connection,
		const QString &	busName,
		const QString &	objectPath,
		QObject *	parent = `0`
	)

Creates a ChannelTypeStreamedMediaInterface associated with the given object on the given bus.

Parameters

connection	The bus via which the object can be reached.
busName	Name of the service the object is on.
objectPath	Path to the object on the service.
parent	Passed to the parent class constructor.

◆ ChannelTypeStreamedMediaInterface() [3/5]

Tp::Client::ChannelTypeStreamedMediaInterface::ChannelTypeStreamedMediaInterface ( Tp::DBusProxy * proxy )

Creates a ChannelTypeStreamedMediaInterface associated with the same object as the given proxy.

Parameters

proxy The proxy to use. It will also be the QObject::parent() for this object.

◆ ChannelTypeStreamedMediaInterface() [4/5]

Tp::Client::ChannelTypeStreamedMediaInterface::ChannelTypeStreamedMediaInterface ( const Tp::Client::ChannelInterface & mainInterface )

explicit

Creates a ChannelTypeStreamedMediaInterface associated with the same object as the given proxy. Additionally, the created proxy will have the same parent as the given proxy.

Parameters

mainInterface The proxy to use.

◆ ChannelTypeStreamedMediaInterface() [5/5]

Tp::Client::ChannelTypeStreamedMediaInterface::ChannelTypeStreamedMediaInterface	(	const Tp::Client::ChannelInterface &	mainInterface,
		QObject *	parent
	)

Creates a ChannelTypeStreamedMediaInterface associated with the same object as the given proxy. However, a different parent object can be specified.

Parameters

mainInterface	The proxy to use.
parent	Passed to the parent class constructor.

Member Function Documentation

◆ staticInterfaceName()

static QLatin1String Tp::Client::ChannelTypeStreamedMediaInterface::staticInterfaceName ( )

inlinestatic

Returns the name of the interface "org.freedesktop.Telepathy.Channel.Type.StreamedMedia", which this class represents.

Returns: The D-Bus interface name.

◆ requestPropertyInitialAudio()

Tp::PendingVariant* Tp::Client::ChannelTypeStreamedMediaInterface::requestPropertyInitialAudio ( ) const

inline

Asynchronous getter for the remote object property InitialAudio of type bool.

If set to true in a channel request that will create a new channel, the connection manager should immediately attempt to establish an audio stream to the remote contact, making it unnecessary for the client to call ChannelTypeStreamedMediaInterface::RequestStreams() .

If this property, or InitialVideo, is passed to EnsureChannel (as opposed to CreateChannel), the connection manager SHOULD ignore these properties when checking whether it can return an existing channel as suitable; these properties only become significant when the connection manager has decided to create a new channel.

If true on a requested channel, this indicates that the audio stream has already been requested and the client does not need to call RequestStreams, although it MAY still do so.

If true on an unrequested (incoming) channel, this indicates that the remote contact initially requested an audio stream; this does not imply that that audio stream is still active (as indicated by ChannelTypeStreamedMediaInterface::ListStreams() ).

This property is immutable (cannot change), and therefore SHOULD appear wherever immutable properties are reported, e.g. ConnectionInterfaceRequestsInterface::NewChannels() signals.

This reduces D-Bus round trips.

Connection managers capable of signalling audio calls to contacts SHOULD include a channel class in ConnectionInterfaceRequestsInterface::RequestableChannelClasses with ChannelInterface::ChannelType = ChannelTypeStreamedMediaInterface and ChannelInterface::TargetHandleType = Contact in the fixed properties dictionary, and InitialAudio (and also InitialVideo, if applicable) in the allowed properties list. Clients wishing to discover whether a connection manager can signal audio and/or video calls SHOULD use this information.

Not all protocols support signalling video calls, and it would be possible (although unlikely) to have a protocol where only video, and not audio, could be signalled.

Connection managers that support the ConnectionInterfaceContactCapabilitiesInterface interface SHOULD represent the capabilities of receiving audio and/or video calls by including a channel class in a contact's capabilities with ChannelType = StreamedMedia in the fixed properties dictionary, and InitialAudio and/or InitialVideo in the allowed properties list. Clients wishing to discover whether a particular contact is likely to be able to receive audio and/or video calls SHOULD use this information.

Not all clients support video calls, and it would also be possible (although unlikely) to have a client which could only stream video, not audio.

Clients that are willing to receive audio and/or video calls SHOULD include the following among their channel classes if calling ConnectionInterfaceContactCapabilitiesInterface::UpdateCapabilities() (clients of a ChannelDispatcherInterface SHOULD instead arrange for the ChannelDispatcher to do this, by including the filters in their ClientHandlerInterface::HandlerChannelFilter properties):

{ ChannelType = StreamedMedia }
{ ChannelType = StreamedMedia, InitialAudio = true } if receiving calls with audio is supported
{ ChannelType = StreamedMedia, InitialVideo = true } if receiving calls with video is supported

Connection managers for protocols with capability discovery, like XMPP, need this information to advertise the appropriate capabilities for their protocol.

Returns: A pending variant which will emit finished when the property has been retrieved.

◆ requestPropertyInitialVideo()

Tp::PendingVariant* Tp::Client::ChannelTypeStreamedMediaInterface::requestPropertyInitialVideo ( ) const

inline

Asynchronous getter for the remote object property InitialVideo of type bool.

The same as InitialAudio , but for a video stream. This property is immutable (cannot change).

In particular, note that if this property is false, this does not imply that an active video stream has not been added, only that no video stream was active at the time the channel appeared.

This property is the correct way to discover whether connection managers, contacts etc. support video calls; it appears in capabilities structures in the same way as InitialAudio.

Returns: A pending variant which will emit finished when the property has been retrieved.

◆ requestPropertyImmutableStreams()

Tp::PendingVariant* Tp::Client::ChannelTypeStreamedMediaInterface::requestPropertyImmutableStreams ( ) const

inline

Asynchronous getter for the remote object property ImmutableStreams of type bool.

If True, once streams have been requested for this channel (either by setting InitialAudio or InitialVideo when the channel is requested, or by calling RequestStreams() on a channel with no streams), a stream of a different content type cannot be added; subsequent calls to RequestStreams() that attempt to do so will fail.

If this property is missing, clients SHOULD assume that it is false, and thus that the channel's streams can be changed once the call has started.

If this property is present in the "allowed" set in all of the StreamedMedia entries in a contact's capabilities, then user interfaces MAY choose to show a separate "call" option for each class of call.

For example, once an audio-only Google Talk call has started, it is not possible to add a video stream; both audio and video must be requested at the start of the call if video is desired. User interfaces may use this pseudo-capability as a hint to display separate "Audio call" and "Video call" buttons, rather than a single "Call" button with the option to add and remove video once the call has started for contacts without this flag.

This property is immutable, and therefore SHOULD be announced in ConnectionInterfaceRequestsInterface::NewChannels() , etc.

Returns: A pending variant which will emit finished when the property has been retrieved.

◆ requestAllProperties()

Tp::PendingVariantMap* Tp::Client::ChannelTypeStreamedMediaInterface::requestAllProperties ( ) const

inline

Request all of the DBus properties on the interface.

Returns: A pending variant map which will emit finished when the properties have been retrieved.

◆ ListStreams

QDBusPendingReply<Tp::MediaStreamInfoList> Tp::Client::ChannelTypeStreamedMediaInterface::ListStreams ( int timeout = -1 )

inlineslot

Begins a call to the D-Bus method ListStreams on the remote object.

Returns an array of structs representing the streams currently active within this channel. Each stream is identified by an unsigned integer which is unique for each stream within the channel.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters

timeout The timeout in milliseconds.

Returns

An array of structs containing:

the stream identifier
the contact handle who the stream is with (or 0 if the stream represents more than a single member)
the type of the stream
the current stream state
the current direction of the stream
the current pending send flags

◆ RemoveStreams

QDBusPendingReply Tp::Client::ChannelTypeStreamedMediaInterface::RemoveStreams	(	const Tp::UIntList &	streams,
		int	timeout = `-1`
	)

inlineslot

Begins a call to the D-Bus method RemoveStreams on the remote object.

Request that the given streams are removed. If all streams are removed, the channel MAY close.

Clients SHOULD NOT attempt to terminate calls by removing all the streams; instead, clients SHOULD terminate calls by removing the ChannelInterfaceGroupInterface::SelfHandle from the channel, using either ChannelInterfaceGroupInterface::RemoveMembers() or ChannelInterfaceGroupInterface::RemoveMembersWithReason() .

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters

streams	An array of stream identifiers (as defined in ListStreams)
timeout	The timeout in milliseconds.

◆ RequestStreamDirection

QDBusPendingReply Tp::Client::ChannelTypeStreamedMediaInterface::RequestStreamDirection	(	uint	streamID,
		uint	streamDirection,
		int	timeout = `-1`
	)

inlineslot

Begins a call to the D-Bus method RequestStreamDirection on the remote object.

Request a change in the direction of an existing stream. In particular, this might be useful to stop sending media of a particular type, or inform the peer that you are no longer using media that is being sent to you.

Depending on the protocol, streams which are no longer sending in either direction should be removed and a StreamRemoved() signal emitted. Some direction changes can be enforced locally (for example, BIDIRECTIONAL -> RECEIVE can be achieved by merely stopping sending), others may not be possible on some protocols, and some need agreement from the remote end. In this case, the MEDIA_STREAM_PENDING_REMOTE_SEND flag will be set in the StreamDirectionChanged() signal, and the signal emitted again without the flag to indicate the resulting direction when the remote end has accepted or rejected the change.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters

streamID	The stream identifier (as defined in ListStreams)
streamDirection	The desired stream direction (a value of MediaStreamDirection)
timeout	The timeout in milliseconds.

◆ RequestStreams

QDBusPendingReply<Tp::MediaStreamInfoList> Tp::Client::ChannelTypeStreamedMediaInterface::RequestStreams	(	uint	contactHandle,
		const Tp::UIntList &	types,
		int	timeout = `-1`
	)

inlineslot

Begins a call to the D-Bus method RequestStreams on the remote object.

Request that streams be established to exchange the given types of media with the given member. In general this will try and establish a bidirectional stream, but on some protocols it may not be possible to indicate to the peer that you would like to receive media, so a send-only stream will be created initially. In the cases where the stream requires remote agreement (eg you wish to receive media from them), the StreamDirectionChanged() signal will be emitted with the MEDIA_STREAM_PENDING_REMOTE_SEND flag set, and the signal emitted again with the flag cleared when the remote end has replied.

If streams of the requested types already exist, calling this method results in the creation of additional streams. Accordingly, clients wishing to have exactly one audio stream or exactly one video stream SHOULD check for the current streams using ListStreams() before calling this method.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters

contactHandle	A contact handle with whom to establish the streams
types	An array of stream types (values of MediaStreamType)
timeout	The timeout in milliseconds.

Returns

An array of structs (in the same order as the given stream types) containing:

the stream identifier
the contact handle who the stream is with (or 0 if the stream represents more than a single member)
the type of the stream
the current stream state
the current direction of the stream
the current pending send flags

◆ StreamAdded

void Tp::Client::ChannelTypeStreamedMediaInterface::StreamAdded	(	uint	streamID,
		uint	contactHandle,
		uint	streamType
	)

signal

Represents the signal StreamAdded on the remote object.

Emitted when a new stream has been added to this channel. Clients SHOULD assume that the stream's Media_Stream_State is initially Disconnected.

If a connection manager needs to represent the addition of a stream whose state is already Connecting or Connected, it MUST do this by emitting StreamAdded, closely followed by StreamStateChanged() indicating a change to the appropriate state.

Historically, it was not clear from the StreamAdded signal what the state of the stream was. telepathy-spec 0.17.22 clarified this.

Similarly, clients SHOULD assume that the initial Media_Stream_Direction of a newly added stream is Receive, and that the initial Media_Stream_Pending_Send is Pending_Local_Send.

If a connection manager needs to represent the addition of a stream whose direction or pending-send differs from those initial values, it MUST do so by emitting StreamAdded, closely followed by StreamDirectionChanged() indicating a change to the appropriate direction and pending-send state.

StreamAdded doesn't itself indicate the stream's direction; this is unfortunate, but is preserved for compatibility.

This is the appropriate direction for streams added by a remote contact on existing connection managers, and does not violate user privacy by automatically sending audio or video (audio streams start off muted, video streams start off not sending). For streams added by the local user using the client receiving the signal, the true direction can also be determined from the return value of the RequestStreams() method.

Existing clients typically operate by maintaining a separate idea of the directions that they would like the streams to have, and enforcing these intended directions by calling RequestStreamDirection() whenever needed.

Parameters

streamID	The stream identifier (as defined in ListStreams)
contactHandle	The contact handle who the stream is with (or 0 if it represents more than a single member)
streamType	The stream type (a value from MediaStreamType)

◆ StreamDirectionChanged

void Tp::Client::ChannelTypeStreamedMediaInterface::StreamDirectionChanged	(	uint	streamID,
		uint	streamDirection,
		uint	pendingFlags
	)

signal

Represents the signal StreamDirectionChanged on the remote object.

Emitted when the direction or pending flags of a stream are changed.

If the MEDIA_STREAM_PENDING_LOCAL_SEND flag is set, the remote user has requested that we begin sending on this stream. RequestStreamDirection() should be called to indicate whether or not this change is acceptable.

This allows for a MSN-style user interface, "Fred has asked you to enable your webcam. (Accept | Reject)", if desired.

Parameters

streamID	The stream identifier (as defined in ListStreams)
streamDirection	The new stream direction (as defined in ListStreams)
pendingFlags	The new pending send flags (as defined in ListStreams)

◆ StreamError

void Tp::Client::ChannelTypeStreamedMediaInterface::StreamError	(	uint	streamID,
		uint	errorCode,
		const QString &	message
	)

signal

Represents the signal StreamError on the remote object.

Emitted when a stream encounters an error.

Parameters

streamID	The stream identifier (as defined in ListStreams)
errorCode	A stream error number, one of the values of MediaStreamError
message	A string describing the error (for debugging purposes only)

◆ StreamRemoved

void Tp::Client::ChannelTypeStreamedMediaInterface::StreamRemoved ( uint streamID )

signal

Represents the signal StreamRemoved on the remote object.

Emitted when a stream has been removed from this channel.

Parameters

streamID

stream_id - the stream identifier (as defined in ListStreams)

◆ StreamStateChanged

void Tp::Client::ChannelTypeStreamedMediaInterface::StreamStateChanged	(	uint	streamID,
		uint	streamState
	)

signal

Represents the signal StreamStateChanged on the remote object.

Emitted when a member's stream's state changes.

Parameters

streamID	The stream identifier (as defined in ListStreams)
streamState	The new stream state (as defined in ListStreams)

◆ invalidate()

void Tp::Client::ChannelTypeStreamedMediaInterface::invalidate	(	Tp::DBusProxy *	proxy,
		const QString &	error,
		const QString &	message
	)

protectedvirtual

Reimplemented from Tp::AbstractInterface.

Public Slots

Signals

Public Member Functions

Static Public Member Functions

Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ChannelTypeStreamedMediaInterface() [1/5]

◆ ChannelTypeStreamedMediaInterface() [2/5]

◆ ChannelTypeStreamedMediaInterface() [3/5]

◆ ChannelTypeStreamedMediaInterface() [4/5]

◆ ChannelTypeStreamedMediaInterface() [5/5]

Member Function Documentation

◆ staticInterfaceName()

◆ requestPropertyInitialAudio()

◆ requestPropertyInitialVideo()

◆ requestPropertyImmutableStreams()

◆ requestAllProperties()

◆ ListStreams

◆ RemoveStreams

◆ RequestStreamDirection

◆ RequestStreams

◆ StreamAdded

◆ StreamDirectionChanged

◆ StreamError

◆ StreamRemoved

◆ StreamStateChanged

◆ invalidate()