tp_base_client_add_observer_filter ()

void
tp_base_client_add_observer_filter (TpBaseClient *self,
                                    GHashTable *filter);

Register a new channel class as Observer.ObserverChannelFilter. The TpBaseClientClass.observe_channels virtual method will be called whenever a new channel's properties match the ones in filter .

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.observe_channels.

Since: 0.11.5

tp_base_client_add_observer_filter_vardict ()

void
tp_base_client_add_observer_filter_vardict
                               (TpBaseClient *self,
                                GVariant *filter);

Register a new channel class as Observer.ObserverChannelFilter. The TpBaseClientClass.observe_channels virtual method will be called whenever a new channel's properties match the ones in filter .

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.observe_channels.

If the variant is floating (see g_variant_ref_sink()), ownership will be taken, allowing for uses like this:

1
2
3
4
5

tp_base_client_add_observer_filter_vardict (client,
   g_variant_new_parsed ("{ %s: <%s>, %s: <%u>, ... }",
       TP_PROP_CHANNEL_CHANNEL_TYPE, TP_IFACE_CHANNEL_TYPE_TEXT,
       TP_PROP_CHANNEL_TARGET_HANDLE_TYPE, (guint32) TP_HANDLE_TYPE_CONTACT,
       ...));

Since: 0.19.10

tp_base_client_take_observer_filter ()

void
tp_base_client_take_observer_filter (TpBaseClient *self,
                                     GHashTable *filter);

The same as tp_base_client_add_observer_filter(), but ownership of filter is taken by self . This makes it convenient to call using tp_asv_new():

1
2
3
4
5
6
7

tp_base_client_take_observer_filter (client,
   tp_asv_new (
       TP_PROP_CHANNEL_CHANNEL_TYPE, G_TYPE_STRING,
           TP_IFACE_CHANNEL_TYPE_TEXT,
       TP_PROP_CHANNEL_TARGET_HANDLE_TYPE, G_TYPE_UINT,
           TP_HANDLE_TYPE_CONTACT,
       ...));

[skip]

Since: 0.11.5

tp_base_client_set_observer_recover ()

void
tp_base_client_set_observer_recover (TpBaseClient *self,
                                     gboolean recover);

Set whether the channel dispatcher should attempt to recover this Observer if it crashes. (This is implemented by setting the value of its Recover D-Bus property.)

Normally, Observers are only notified when new channels appear. If an Observer is set to recover, when it registers with tp_base_client_register(), it will also be told about any channels that already existed before it started.

For Observers that are activatable as a D-Bus service, if the Observer exits or crashes while there are any channels that match its filter, it will automatically be restarted by service-activation.

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.observe_channels.

Since: 0.11.5

tp_base_client_set_observer_delay_approvers ()

void
tp_base_client_set_observer_delay_approvers
                               (TpBaseClient *self,
                                gboolean delay);

Set whether the channel dispatcher should wait for tp_observe_channels_context_accept() or tp_observe_channels_context_fail() to be called before calling TpBaseClientClass.add_dispatch_operation on appropriate Approvers.

This is implemented by setting the value of the DelayApprovers D-Bus property.

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.observe_channels.

Since: 0.13.16

TpBaseClientClassObserveChannelsImpl ()

void
(*TpBaseClientClassObserveChannelsImpl)
                               (TpBaseClient *client,
                                TpAccount *account,
                                TpConnection *connection,
                                GList *channels,
                                TpChannelDispatchOperation *dispatch_operation,
                                GList *requests,
                                TpObserveChannelsContext *context);

Signature of the implementation of the ObserveChannels method.

This function must call either tp_observe_channels_context_accept(), tp_observe_channels_context_delay() or tp_observe_channels_context_fail() on context before it returns.

Since: 0.11.5

tp_base_client_implement_observe_channels ()

void
tp_base_client_implement_observe_channels
                               (TpBaseClientClass *klass,
                                TpBaseClientClassObserveChannelsImpl impl);

Called by subclasses to define the actual implementation of the ObserveChannels() D-Bus method.

Since 0.11.13 this is exactly equivalent to setting the TpBaseClientClass.observe_channels function pointer.

[skip]

Since: 0.11.5

tp_base_client_add_approver_filter ()

void
tp_base_client_add_approver_filter (TpBaseClient *self,
                                    GHashTable *filter);

Register a new channel class as Approver.ApproverChannelFilter. The TpBaseClientClass.add_dispatch_operation virtual method will be called whenever a new channel's properties match the ones in filter .

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.add_dispatch_operation.

Since: 0.11.5

tp_base_client_add_approver_filter_vardict ()

void
tp_base_client_add_approver_filter_vardict
                               (TpBaseClient *self,
                                GVariant *filter);

Register a new channel class as Approver.ApproverChannelFilter. The TpBaseClientClass.add_dispatch_operation virtual method will be called whenever a new channel's properties match the ones in filter .

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.add_dispatch_operation.

If the variant is floating (see g_variant_ref_sink()), ownership will be taken. See tp_base_client_add_observer_filter_vardict() for more details.

Since: 0.19.10

tp_base_client_take_approver_filter ()

void
tp_base_client_take_approver_filter (TpBaseClient *self,
                                     GHashTable *filter);

The same as tp_base_client_add_approver_filter(), but ownership of filter is taken by self . This makes it convenient to call using tp_asv_new():

1
2
3
4
5
6
7

tp_base_client_take_approver_filter (client,
   tp_asv_new (
       TP_PROP_CHANNEL_CHANNEL_TYPE, G_TYPE_STRING,
           TP_IFACE_CHANNEL_TYPE_TEXT,
       TP_PROP_CHANNEL_TARGET_HANDLE_TYPE, G_TYPE_UINT,
           TP_HANDLE_TYPE_CONTACT,
       ...));

[skip]

Since: 0.11.5

TpBaseClientClassAddDispatchOperationImpl ()

void
(*TpBaseClientClassAddDispatchOperationImpl)
                               (TpBaseClient *client,
                                TpAccount *account,
                                TpConnection *connection,
                                GList *channels,
                                TpChannelDispatchOperation *dispatch_operation,
                                TpAddDispatchOperationContext *context);

Signature of the implementation of the AddDispatchOperation method.

This function must call either tp_add_dispatch_operation_context_accept(), tp_add_dispatch_operation_context_delay() or tp_add_dispatch_operation_context_fail() on context before it returns.

The implementation can then use tp_channel_dispatch_operation_handle_with_async() to approve handling of the channels, or tp_channel_dispatch_operation_claim_async() to take responsibility for handling or closing them".

Since: 0.11.5

tp_base_client_implement_add_dispatch_operation ()

void
tp_base_client_implement_add_dispatch_operation
                               (TpBaseClientClass *klass,
                                TpBaseClientClassAddDispatchOperationImpl impl);

Called by subclasses to define the actual implementation of the AddDispatchOperation() D-Bus method.

Since 0.11.13 this is exactly equivalent to setting the TpBaseClientClass.add_dispatch_operation function pointer.

[skip]

Since: 0.11.5

tp_base_client_add_handler_capabilities ()

void
tp_base_client_add_handler_capabilities
                               (TpBaseClient *self,
                                const gchar * const *tokens);

Add several capability tokens to this client. These are used to signal that Telepathy connection managers should advertise certain capabilities to other contacts, such as the ability to receive audio/video calls using particular streaming protocols and codecs.

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.handle_channels.

Since: 0.11.6

tp_base_client_add_handler_capabilities_varargs ()

void
tp_base_client_add_handler_capabilities_varargs
                               (TpBaseClient *self,
                                const gchar *first_token,
                                ...);

Convenience C API equivalent to calling tp_base_client_add_handler_capability() for each capability token.

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.handle_channels.

[skip]

Since: 0.11.6

tp_base_client_add_handler_capability ()

void
tp_base_client_add_handler_capability (TpBaseClient *self,
                                       const gchar *token);

Add one capability token to this client, as if via tp_base_client_add_handler_capabilities().

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.handle_channels.

Since: 0.11.6

tp_base_client_add_handler_filter ()

void
tp_base_client_add_handler_filter (TpBaseClient *self,
                                   GHashTable *filter);

Register a new channel class as Handler.HandlerChannelFilter. The TpBaseClientClass.handle_channels virtual method will be called whenever a new channel's properties match the ones in filter .

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.handle_channels.

Since: 0.11.6

tp_base_client_add_handler_filter_vardict ()

void
tp_base_client_add_handler_filter_vardict
                               (TpBaseClient *self,
                                GVariant *filter);

Register a new channel class as Handler.HandlerChannelFilter. The TpBaseClientClass.handle_channels virtual method will be called whenever a new channel's properties match the ones in filter .

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.handle_channels.

If the variant is floating (see g_variant_ref_sink()), ownership will be taken. See tp_base_client_add_observer_filter_vardict() for more details.

Since: 0.19.10

tp_base_client_take_handler_filter ()

void
tp_base_client_take_handler_filter (TpBaseClient *self,
                                    GHashTable *filter);

The same as tp_base_client_add_handler_filter(), but ownership of filter is taken by self . This makes it convenient to call using tp_asv_new():

1
2
3
4
5
6
7

tp_base_client_take_handler_filter (client,
   tp_asv_new (
       TP_PROP_CHANNEL_CHANNEL_TYPE, G_TYPE_STRING,
           TP_IFACE_CHANNEL_TYPE_TEXT,
       TP_PROP_CHANNEL_TARGET_HANDLE_TYPE, G_TYPE_UINT,
           TP_HANDLE_TYPE_CONTACT,
       ...));

[skip]

Since: 0.11.6

tp_base_client_be_a_handler ()

void
tp_base_client_be_a_handler (TpBaseClient *self);

Register self as a Client.Handler with an empty list of filters. This is useful if you want to create a client that only handle channels for which it's the PreferredHandler.

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.handle_channels.

Since: 0.11.6

TpBaseClientClassHandleChannelsImpl ()

void
(*TpBaseClientClassHandleChannelsImpl)
                               (TpBaseClient *client,
                                TpAccount *account,
                                TpConnection *connection,
                                GList *channels,
                                GList *requests_satisfied,
                                gint64 user_action_time,
                                TpHandleChannelsContext *context);

Signature of the implementation of the HandleChannels method.

This function must call either tp_handle_channels_context_accept(), tp_handle_channels_context_delay() or tp_handle_channels_context_fail() on context before it returns.

Since: 0.11.6

tp_base_client_implement_handle_channels ()

void
tp_base_client_implement_handle_channels
                               (TpBaseClientClass *klass,
                                TpBaseClientClassHandleChannelsImpl impl);

Called by subclasses to define the actual implementation of the HandleChannels() D-Bus method.

Since 0.11.13 this is exactly equivalent to setting the TpBaseClientClass.handle_channels function pointer.

[skip]

Since: 0.11.6

tp_base_client_add_account_features ()

void
tp_base_client_add_account_features (TpBaseClient *self,
                                     const GQuark *features,
                                     gssize n);

Request that the given features are prepared on each TpAccount (in addition to TP_ACCOUNT_FEATURE_CORE) before calling TpBaseClientClass.observe_channels, TpBaseClientClass.add_dispatch_operation or TpBaseClientClass.handle_channels, or emitting “request-added”.

Since: 0.11.14

tp_base_client_add_account_features_varargs ()

void
tp_base_client_add_account_features_varargs
                               (TpBaseClient *self,
                                GQuark feature,
                                ...);

The same as tp_base_client_add_account_features(), but with a more convenient calling convention from C.

[skip]

Since: 0.11.14

tp_base_client_add_connection_features ()

void
tp_base_client_add_connection_features
                               (TpBaseClient *self,
                                const GQuark *features,
                                gssize n);

Request that the given features are prepared on each TpConnection (in addition to TP_CONNECTION_FEATURE_CORE) before calling TpBaseClientClass.observe_channels, TpBaseClientClass.add_dispatch_operation or TpBaseClientClass.handle_channels.

Since: 0.11.14

tp_base_client_add_connection_features_varargs ()

void
tp_base_client_add_connection_features_varargs
                               (TpBaseClient *self,
                                GQuark feature,
                                ...);

The same as tp_base_client_add_connection_features(), but with a more convenient calling convention from C.

[skip]

Since: 0.11.14

tp_base_client_add_channel_features ()

void
tp_base_client_add_channel_features (TpBaseClient *self,
                                     const GQuark *features,
                                     gssize n);

Request that the given features are prepared on each TpChannel (in addition to TP_CHANNEL_FEATURE_CORE) before calling TpBaseClientClass.observe_channels, TpBaseClientClass.add_dispatch_operation or TpBaseClientClass.handle_channels.

Since: 0.11.14

tp_base_client_add_channel_features_varargs ()

void
tp_base_client_add_channel_features_varargs
                               (TpBaseClient *self,
                                GQuark feature,
                                ...);

The same as tp_base_client_add_channel_features(), but with a more convenient calling convention from C.

[skip]

Since: 0.11.14

tp_base_client_get_handled_channels ()

GList *
tp_base_client_get_handled_channels (TpBaseClient *self);

Returns the set of channels currently handled by this base client or by any other TpBaseClient with which it shares a unique name.

Since: 0.11.6

tp_base_client_dup_handled_channels ()

GList *
tp_base_client_dup_handled_channels (TpBaseClient *self);

Returns the set of channels currently handled by this base client or by any other TpBaseClient with which it shares a unique name.

Since: 0.19.9

tp_base_client_is_handling_channel ()

gboolean
tp_base_client_is_handling_channel (TpBaseClient *self,
                                    TpChannel *channel);

Check if self is currently handling channel .

Since: 0.14.5

tp_base_client_delegate_channels_async ()

void
tp_base_client_delegate_channels_async
                               (TpBaseClient *self,
                                GList *channels,
                                gint64 user_action_time,
                                const gchar *preferred_handler,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously calls DelegateChannels on the ChannelDispatcher to try stopping handling channels and pass them to another Handler. You can then call tp_base_client_delegate_channels_finish() to get the result of the operation.

Since: 0.15.0

tp_base_client_delegate_channels_finish ()

gboolean
tp_base_client_delegate_channels_finish
                               (TpBaseClient *self,
                                GAsyncResult *result,
                                GPtrArray **delegated,
                                GHashTable **not_delegated,
                                GError **error);

Finishes an async channels delegation request started using tp_base_client_delegate_channels_async().

Since: 0.15.0

TpBaseClientDelegatedChannelsCb ()

void
(*TpBaseClientDelegatedChannelsCb) (TpBaseClient *client,
                                    GPtrArray *channels,
                                    gpointer user_data);

Called when a client asked us to delegate channels to another Handler. When this function is called client is not longer handling channels .

Since: 0.15.3

tp_base_client_set_delegated_channels_callback ()

void
tp_base_client_set_delegated_channels_callback
                               (TpBaseClient *self,
                                TpBaseClientDelegatedChannelsCb callback,
                                gpointer user_data,
                                GDestroyNotify destroy);

Turn on support for the org.freedesktop.Telepathy.ChannelRequest.DelegateToPreferredHandler hint.

When receiving a request containing this hint, self will automatically delegate the channels to the preferred handler of the request and then call callback to inform the client that it is no longer handling those channels.

Since: 0.15.3

tp_channel_dispatcher_present_channel_async ()

void
tp_channel_dispatcher_present_channel_async
                               (TpChannelDispatcher *self,
                                TpChannel *channel,
                                gint64 user_action_time,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously calls PresentChannel on the ChannelDispatcher to ask to the handler of channel to re-present it to the user. You can then call tp_channel_dispatcher_present_channel_finish() to get the result of the operation.

Since: 0.15.0

tp_channel_dispatcher_present_channel_finish ()

gboolean
tp_channel_dispatcher_present_channel_finish
                               (TpChannelDispatcher *self,
                                GAsyncResult *result,
                                GError **error);

Finishes an async channel presentation request started using tp_channel_dispatcher_present_channel_async().

Since: 0.15.0

tp_base_client_get_pending_requests ()

GList *
tp_base_client_get_pending_requests (TpBaseClient *self);

Only works if tp_base_client_set_handler_request_notification() has been called. Returns the list of requests self is likely be asked to handle.

Since: 0.11.6

tp_base_client_dup_pending_requests ()

GList *
tp_base_client_dup_pending_requests (TpBaseClient *self);

Only works if tp_base_client_set_handler_request_notification() has been called. Returns the list of requests self is likely be asked to handle.

Since: 0.19.9

tp_base_client_set_handler_bypass_approval ()

void
tp_base_client_set_handler_bypass_approval
                               (TpBaseClient *self,
                                gboolean bypass_approval);

Set whether the channels destined for this handler are automatically handled, without invoking approvers. (This is implemented by setting the value of its BypassApproval D-Bus property.)

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.handle_channels.

Since: 0.11.6

tp_base_client_set_handler_request_notification ()

void
tp_base_client_set_handler_request_notification
                               (TpBaseClient *self);

Indicate that self is a Handler willing to be notified about requests for channels that it is likely to be asked to handle. This means that the “request-added” and “request-removed” signals will be fired and tp_base_client_get_pending_requests() will return the list of pending requests.

This method may only be called before tp_base_client_register() is called, and may only be called on objects whose class implements TpBaseClientClass.handle_channels.

Since: 0.11.6

tp_base_client_register ()

gboolean
tp_base_client_register (TpBaseClient *self,
                         GError **error);

Publish self as an available client. After this method is called, as long as it continues to exist, it will receive and process whatever events were requested via the various filters.

Methods that set the filters and other immutable state, such as tp_base_client_add_observer_filter(), cannot be called after this one.

Since: 0.11.5

tp_base_client_unregister ()

void
tp_base_client_unregister (TpBaseClient *self);

Remove this client object from D-Bus, if tp_base_client_register() has already been called.

If the object is not registered, this method may be called, but has no effect.

Releasing the last reference to the object also has the same effect as calling this method, but this method should be preferred, as it has more deterministic behaviour.

If the object still exists, tp_base_client_register() may be used to attempt to register it again.

Since: 0.11.6

tp_base_client_get_bus_name ()

const gchar *
tp_base_client_get_bus_name (TpBaseClient *self);

Return the bus name of self . Note that doesn't mean the client is actually owning this name; for example if tp_base_client_register() has not been called yet or failed.

Since: 0.11.5

tp_base_client_get_object_path ()

const gchar *
tp_base_client_get_object_path (TpBaseClient *self);

Return the object path of self . Note that doesn't mean the client is actually registered on this path; for example if tp_base_client_register() has not been called yet or failed.

Since: 0.11.5

tp_base_client_get_dbus_daemon ()

TpDBusDaemon *
tp_base_client_get_dbus_daemon (TpBaseClient *self);

Return the “dbus-daemon” construct-only property, which represents the D-Bus connection used to export this client object.

The returned object's reference count is not incremented, so it is not necessarily valid after self is destroyed.

Since: 0.11.11

tp_base_client_get_name ()

const gchar *
tp_base_client_get_name (TpBaseClient *self);

Return the “name” construct-only property, which is used as part of the bus name and object path.

Since: 0.11.11

tp_base_client_get_uniquify_name ()

gboolean
tp_base_client_get_uniquify_name (TpBaseClient *self);

Return the “uniquify-name” construct-only property; if this is true, the bus name and object path will be made unique by appending a suffix that includes the D-Bus unique name and a per-process counter.

Since: 0.11.11

tp_base_client_get_account_manager ()

TpAccountManager *
tp_base_client_get_account_manager (TpBaseClient *self);

Return the “account-manager” construct-only property, which is the account manager used to look up or create TpAccount objects.

The returned object's reference count is not incremented, so it is not necessarily valid after self is destroyed.

It is not guaranteed that any particular features are prepared on this object; enable and wait for features with tp_proxy_prepare_async().

[skip]

Since: 0.11.14

tp_base_client_set_channel_factory ()

void
tp_base_client_set_channel_factory (TpBaseClient *self,
                                    TpClientChannelFactory *factory);

Change the value of the “channel-factory” property. It can't be changed once self has been registered.

Since: 0.13.2

tp_base_client_get_channel_factory ()

TpClientChannelFactory *
tp_base_client_get_channel_factory (TpBaseClient *self);

Return the “channel-factory” property.

[skip]

Since: 0.13.2

struct TpBaseClient

struct TpBaseClient;

Data structure representing a generic TpSvcClient implementation.

Since: 0.11.5

struct TpBaseClientClass

struct TpBaseClientClass {
    GObjectClass parent_class;
    TpBaseClientClassObserveChannelsImpl observe_channels;
    TpBaseClientClassAddDispatchOperationImpl add_dispatch_operation;
    TpBaseClientClassHandleChannelsImpl handle_channels;
};

The class of a TpBaseClient.

The virtual methods observe_channels , add_dispatch_operation and handle_channels can be also implemented by calling tp_base_client_implement_observe_channels(), tp_base_client_implement_add_dispatch_operation() and tp_base_client_implement_handle_channels(). This is compatible with telepathy-glib versions older than 0.11.13.

Since: 0.11.5

The “account-manager” property

  “account-manager”          TpAccountManager *

Account manager for this base client, used to look up or create TpAccount objects. This may be specified in the constructor in order to get existing TpAccount objects.

It is not guaranteed that any of its features have been prepared, and it is not necessary to wait for any features before specifying this property in the constructor.

Clients that interact with the TpAccount should usually set this property instead of “dbus-daemon”. Doing this will ensure that each account, connection or contact is represented by a single TpAccount, TpConnection or TpContact object, shared between all the cooperating modules that have the same TpAccountManager.

If the “dbus-daemon” is set to the result of tp_dbus_daemon_dup(), then this property defaults to the result of tp_account_manager_dup().

This property may be NULL initially, but will always be non-NULL after the TpBaseClient has been constructed.

It is an error to specify both a non-NULL account manager, and a non-NULL “dbus-daemon” that is not the same as the account manager's “dbus-daemon”.

Owner: TpBaseClient

Flags: Read / Write / Construct Only

Since: 0.11.14

The “channel-factory” property

  “channel-factory”          GObject *

The object implementing the TpClientChannelFactoryInterface interface that will be used to create channel proxies. While tp_base_client_register() has not yet been called, this property can be changed using tp_base_client_set_channel_factory().

If no channel factory is specified then TpAutomaticProxyFactory is used.

Owner: TpBaseClient

Flags: Read / Write / Construct Only

Since: 0.13.2

The “dbus-daemon” property

  “dbus-daemon”              TpDBusDaemon *

TpDBusDaemon object encapsulating this object's connection to D-Bus. Read-only except during construction.

This property can't be NULL after construction.

Since 0.11.14 this property may be NULL or unspecified in g_object_new(), but only if “account-manager” is provided instead, in which case its “dbus-daemon” property will be used.

Owner: TpBaseClient

Flags: Read / Write / Construct Only

Since: 0.11.5

The “factory” property

  “factory”                  TpSimpleClientFactory *

Factory for this base client, used to look up or create TpAccount objects.

Owner: TpBaseClient

Flags: Read / Write / Construct Only

Since: 0.15.5

The “name” property

  “name”                     gchar *

The name of the client. This is used to register the D-Bus service name and object path of the service.

This property can't be NULL.

Owner: TpBaseClient

Flags: Read / Write / Construct Only

Default value: NULL

Since: 0.11.5

The “uniquify-name” property

  “uniquify-name”            gboolean

If TRUE, tp_base_client_register() will append an unique token to the service bus name and object path to ensure they are unique.

Owner: TpBaseClient

Flags: Read / Write / Construct Only

Default value: FALSE

Since: 0.11.5

The “request-added” signal

void
user_function (TpBaseClient     *self,
               TpAccount        *account,
               TpChannelRequest *request,
               gpointer          user_data)

Emitted when a channels have been requested, and that if the request is successful, they will probably be handled by this Handler.

This signal is only fired if tp_base_client_set_handler_request_notification() has been called on self previously.

Flags: Has Details

Since: 0.11.6

The “request-removed” signal

void
user_function (TpBaseClient     *self,
               TpChannelRequest *request,
               gchar            *error,
               gchar            *message,
               gpointer          user_data)

Emitted when a request has failed and should be disregarded.

This signal is only fired if tp_base_client_set_handler_request_notification() has been called on self previously.

Flags: Has Details

Since: 0.11.6