Top |
TpBaseConnectionManagerTpBaseConnectionManager — base class for TpSvcConnectionManager implementations |
GDBusConnection * | dbus-connection | Read / Write / Construct Only |
GStrv | interfaces | Read |
GHashTable_gchararray+GHashTable_gchararray+GValue__* | protocols | Read |
struct | TpCMParamSpec |
TpCMProtocolSpec | |
struct | TpBaseConnectionManager |
struct | TpBaseConnectionManagerClass |
This base class makes it easier to write TpSvcConnectionManager implementations by managing the D-Bus object path and bus name, and maintaining a table of active connections. Subclasses should usually only need to override the members of the class data structure.
gboolean (*TpCMParamFilter) (const TpCMParamSpec *paramspec
,GValue *value
,GError **error
);
Signature of a callback used to validate and/or normalize user-provided CM parameter values.
paramspec |
The parameter specification. The filter is likely to use name (for the error message if the value is invalid) and filter_data. |
|
value |
The value for that parameter provided by the user. May be changed to contain a different value of the same type, if some sort of normalization is required |
|
error |
Used to raise |
gboolean tp_cm_param_filter_string_nonempty (const TpCMParamSpec *paramspec
,GValue *value
,GError **error
);
A TpCMParamFilter which rejects empty strings.
gboolean tp_cm_param_filter_uint_nonzero (const TpCMParamSpec *paramspec
,GValue *value
,GError **error
);
A TpCMParamFilter which rejects zero, useful for server port numbers.
void (*TpCMParamSetter) (const TpCMParamSpec *paramspec
,const GValue *value
,gpointer params
);
The signature of a callback used to set a parameter within the opaque data structure used for a protocol.
paramspec |
The parameter specification. The setter is likely to use some combination of the name, offset and setter_data fields. |
|
value |
The value for that parameter provided by the user. |
|
params |
An opaque data structure, created by TpCMProtocolSpec.params_new. |
Since 0.7.0
void tp_cm_param_setter_offset (const TpCMParamSpec *paramspec
,const GValue *value
,gpointer params
);
A TpCMParamSetter which sets parameters by dereferencing an offset
from params
. If paramspec->offset
is G_MAXSIZE, the parameter is
deemed obsolete, and is accepted but ignored.
paramspec |
A parameter specification with offset set to some meaningful value. |
|
value |
The value for that parameter, either provided by the user or constructed from the parameter's default. |
|
params |
An opaque data structure such that the address at ( |
Since 0.7.0
TpBaseConnection * (*TpBaseConnectionManagerNewConnFunc) (TpBaseConnectionManager *self
,const gchar *proto
,TpIntset *params_present
,void *parsed_params
,GError **error
);
A function that will return a new connection according to the parsed parameters; used to implement RequestConnection.
The connection manager base class will register the bus name for the new connection, and place a reference to it in its table of connections until the connection's shutdown process finishes.
self |
The connection manager implementation |
|
proto |
The protocol name from the D-Bus request |
|
params_present |
A set of integers representing the indexes into the array of TpCMParamSpec of those parameters that were present in the request |
|
parsed_params |
An opaque data structure as returned by the protocol's params_new function, populated according to the parameter specifications |
|
error |
GPtrArray *
(*TpBaseConnectionManagerGetInterfacesFunc)
(TpBaseConnectionManager *self
);
Signature of an implementation of TpBaseConnectionManagerClass.get_interfaces virtual function.
Implementation must first chainup on parent class implementation and then add extra interfaces into the GPtrArray.
1 2 3 4 5 6 7 8 9 10 11 12 |
static GPtrArray * my_connection_manager_get_interfaces (TpBaseConnectionManager *self) { GPtrArray *interfaces; interfaces = TP_BASE_CONNECTION_MANAGER_CLASS ( my_connection_manager_parent_class)->get_interfaces (self); g_ptr_array_add (interfaces, TP_IFACE_BADGERS); return interfaces; } |
a GPtrArray of static strings for D-Bus interfaces implemented by this client.
[transfer container]
Since 0.19.4
GDBusConnection *
tp_base_connection_manager_get_dbus_connection
(TpBaseConnectionManager *self
);
the value of the
“dbus-connection” property. The caller must reference
the returned object with g_object_ref()
if it will be kept.
[transfer none]
Since 0.11.3
gboolean
tp_base_connection_manager_register (TpBaseConnectionManager *self
);
Register the connection manager with an appropriate object path as
determined from its cm_dbus_name
, and register the appropriate well-known
bus name.
void tp_base_connection_manager_add_protocol (TpBaseConnectionManager *self
,TpBaseProtocol *protocol
);
Add a protocol object to the set of supported protocols.
self |
a connection manager object which has not yet registered on D-Bus
(i.e. |
|
protocol |
a protocol object, which must not have the same protocol name as any that has already been added |
struct TpCMParamSpec { const gchar *name; const gchar *dtype; GType gtype; guint flags; gconstpointer def; gsize offset; TpCMParamFilter filter; gconstpointer filter_data; gconstpointer setter_data; };
Structure representing a connection manager parameter, as accepted by RequestConnection.
In addition to the fields documented here, there is one gpointer field
which must currently be NULL
. A meaning may be defined for it in a
future version of telepathy-glib.
const gchar * |
Name as passed over D-Bus |
|
const gchar * |
D-Bus type signature. We currently support 16- and 32-bit integers
( |
|
GType |
GLib type, derived from |
|
guint |
Some combination of TpConnMgrParamFlags |
|
gconstpointer |
Default value, as a (const gchar *) for string parameters, or using GINT_TO_POINTER or GUINT_TO_POINTER for integer parameters |
|
Offset of the parameter in the opaque data structure, if
appropriate. The member at that offset is expected to be a gint,
guint, (gchar *) or gboolean, depending on |
||
TpCMParamFilter |
A callback which is used to validate or normalize the user-provided value before it is written into the opaque data structure |
|
gconstpointer |
Arbitrary opaque data intended for use by the filter function |
|
gconstpointer |
Arbitrary opaque data intended for use by the setter function
instead of or in addition to |
typedef struct { const gchar *name; const TpCMParamSpec *parameters; gpointer (*params_new) (void); void (*params_free) (gpointer); TpCMParamSetter set_param; } TpCMProtocolSpec;
Structure representing a connection manager protocol.
In addition to the fields documented here, there are three gpointer fields
which must currently be NULL
. A meaning may be defined for these in a
future version of telepathy-glib.
const gchar * |
The name which should be passed to RequestConnection for this protocol. |
|
const TpCMParamSpec * |
An array of TpCMParamSpec representing the valid parameters for this protocol, terminated by a TpCMParamSpec whose name entry is NULL. |
|
A function which allocates an opaque data structure to store
the parsed parameters for this protocol. The offset fields
in the members of the |
||
A function which deallocates the opaque data structure provided by params_new, including deallocating its data members (currently, only strings) if necessary. |
||
TpCMParamSetter |
A function which sets a parameter within the opaque data
structure provided by params_new. If |
struct TpBaseConnectionManager;
A base class for connection managers. There are no interesting public fields in the instance structure.
struct TpBaseConnectionManagerClass { GObjectClass parent_class; const char *cm_dbus_name; TpBaseConnectionManagerGetInterfacesFunc get_interfaces; };
The class structure for TpBaseConnectionManager.
In addition to the fields documented here, there are some gpointer fields
which must currently be NULL
(a meaning may be defined for these in a
future version of telepathy-glib).
Since 0.99.1
GObjectClass |
The parent class |
|
The name of this connection manager, as used to construct D-Bus object paths and bus names. Must contain only letters, digits and underscores, and may not start with a digit. Must be filled in by subclasses in their class_init function. |
||
TpBaseConnectionManagerGetInterfacesFunc |
Returns a GPtrArray of static strings of extra
D-Bus interfaces implemented by instances of this class, which may be
filled in by subclasses. The default is to list no additional interfaces.
Implementations must first chainup on parent class implementation and then
add extra interfaces to the GPtrArray. Replaces |
“dbus-connection”
property“dbus-connection” GDBusConnection *
This object's connection to D-Bus. Read-only except during construction.
If this property is NULL
or omitted during construction, the object will
automatically attempt to connect to the session bus with
g_bus_get_sync()
just after it is constructed; if this fails, a
warning will be logged with g_warning()
, and this property will remain
NULL
.
Flags: Read / Write / Construct Only
Since 0.11.3
“interfaces”
property“interfaces” GStrv
The set of D-Bus interfaces available on this ConnectionManager, other than ConnectionManager itself.
Flags: Read
Since 0.11.11
“no-more-connections”
signalvoid user_function (TpBaseConnectionManager *arg0, gpointer user_data)
Emitted when the table of active connections becomes empty.
tp_run_connection_manager()
uses this to detect when to shut down the
connection manager.
Flags: Has Details